9 September 2008 in IEEE Sensors Journal
A novel capacitive device dedicated to the safety of people working on automated production sites has been developed. It can be implemented on an articulated mechanical system (robot, press) to estimate the distance between sensors that are fixed on such a system and a mobile target. An interdigital sensor has been fabricated to identify the target nature among them (human beings or objects). The variable geometry of the system is taken into account as well as its motion relatively towards the ground by means of an ingenious sensitive element design. Furthermore, the sensors are made of conducting paint, thus providing low weight and negligible space hindrance devices. Results show this novel low-cost sensing setup has a great potential to estimate the distance and to discriminate targets.
29 April 2011 in IEEE Sensors Journal
An experimental setup has been conceived to measure the deformation of a rolling ring subjected by stress. This deformation is measured by means of a capacitive sensor. Such a sensor behaves like a displacement sensor that translates the displacement into an electrical signal. Mechanical and electrical operating points determine the sensitivity of the probe and its measurement range. Numerical simulations and tests performed on a prototype confirm the relevance of the device. Applications are numerous: i) mounted on the wheels of motorized vehicles, such sensors allow one to improve the quality information transmitted to integrated safety devices and ii) placed on devices of lift, they measure the load.
23 June 2015 in IEEE Sensors Journal
In the case of an unavoidable frontal collision between a vehicle and a pedestrian, the activation of a protection system can reduce the severity of injuries caused by the collision. However, to fulfill this objective, it is necessary to determine when the shock will occur. To overcome this problem, we place inside the front bumper a metallic sheet that emits an electric field. This field is oriented toward the front of the vehicle by means of various guard screens. The intrusion into the emitted electric field induces a capacitive coupling with the sensor. Which will enable the electronic device to detect the presence of the pedestrian at a distance of 1 m. To avoid slow drifts in time, the change in capacity is measured every millisecond. The last hundred acquisitions are considered as a history. This history is compared with the signature of a pedestrian who was established in the laboratory. When the pedestrian is about a thirty centimeters of the vehicle and the shock is inevitable, the protection systems are activated. When the vehicle is at very low speed, this device can be used as parking assistance.