20 September 2019 in IEEE/ASME Transactions on Mechatronics
Due to limitations in the fabrication technology, the large aperture space optical mirror is always spliced into several small segments rather than fabricated monolithically. To guarantee the imaging quality of the system, each segment needs to be aligned at micron-level precision with millimeter-level range. For this purpose, a PZT actuated 6-axis high-precision positioning system, which consists of three serially connected parallel mechanisms is proposed in this paper. Compared with previous 6-DOF positioning solutions such as a Stewart platform, the proposed design features relatively compact structure and straightforward kinematics. To realize long stroke and fine resolution simultaneously, bridge-type amplifiers are employed to enhance the stroke of the PZT actuation and the flexure hinges are utilized to eliminate friction and backlash. The performance of the amplifier under two kinds of external loads are analyzed so that the amplifiers could be designed according to the application conditions. Furthermore, it can be found that the displacement sensors must be employed at the output end of the actuation module to eliminate the input coupling which commonly exists in the compliant mechanisms. The feasibility of the design is validated by finite element analysis (FEA) and experiment study. The maximum stroke is 2.1mm in Z-axis, and the finest resolution is 0.5μm in X- and Y- axes.
27 July 2021 in IEEE/ASME Transactions on Mechatronics
This article presents a long-stroke nanopositioning stage supported with annular flexure guides to be used in high-precision optical instruments. First, the structure of the novel annular flexure guide and the positioning stage is proposed. Because of the symmetric configuration of the flexure guide, large motion range, high linearity, and high stiffness ratio of the positioning stage are achieved. Second, the stiffness of the flexure guide is modeled by applying the two-port mechanical network method combining with the Castigliano’s theorem and the static equilibrium equation of the structure. Afterwards, the dimension parameters of the flexure guide are optimized by applying the stiffness model to maximize the motion stiffness and the stiffness ratio of the positioning stage. Model validation and performance evaluation are conducted via finite element analysis. Finally, a prototype of the nanopositioning stage is fabricated, and the classical feedforward proportional integral derivative (PID) controller is employed to improve its motion accuracy. Experimental results show that the proposed positioning stage can achieve $\pm$ 5 mm motion range, 20 nm motion resolution, 20 nm positioning accuracy at the maximum output position, and micron tracking accuracy for both sinusoidal trajectory and triangular trajectory under the closed-loop controller.
13 November 2018 in Journal of Mechanisms and Robotics
Flexure pivots are frequently applied in long stroke compliant mechanisms to transmit motion continuously. To improve the motion accuracy, a kind of variable thickness flexure pivot (VTFP) is proposed in this paper. A nonlinear beam element is proposed by utilizing the corotational approach to model the static response of the VTFP under end loads. Finite element analysis and experimental tests are carried out to verify the effectiveness of the modeling method. Based on the static deformation model, the motion range, the rotation stiffness, the center shift, and the variation of the center shift under axial force of the VTFP are investigated. The results show that the VTFP has better motion accuracy and better ability to resist axial force compared with the conventional flexure pivot.
1 December 2017 in Robotics and Computer-Integrated Manufacturing
21 November 2019 in IEEE Access
ABSTRACT A major obstacle that restricts the application of notched flexure hinge based compliant mechanism is its limited motion range. This paper presents the optimal design and tracking control of a superelastic flexure hinge based 3-PRR compliant parallel manipulator (CPM) to achieve high precision planar motion within centimeter’s translation range and up to 10 degrees’ rotational range. Firstly, a novel asymmetric ellipse-parabola (AEP) notch shape is proposed, and the geometric parameters of the AEP superelastic flexure hinge are acquired via multi-objective optimization to obtain desirable transmission performance. Secondly, a nominal inverse kinematic model of the CPM is established, and the dimension parameters of the 3-PRR manipulator are synthesized to maximize the dexterity of the CPM over the regular workspace. Thereafter, a disturbance observer based inverse kinematic control scheme (DOB-IKM) is proposed to suppress the model mismatches and external disturbances of the 3-PRR CPM, where the unmodeled factors of the system are approximated through an online learning radical basis function neural network (RBFNN) and the external disturbances of the CPM is observed and compensated by a disturbance observer (DOB). Finally, a prototype of the 3-PRR CPM is manufactured, and experimental tests show the effectiveness of the proposed control scheme and the superiority of the 3-PRR CPM.