High-entropy ultra-high temperature ceramics (HE-UHTCs) are a class of emerging functional materials for extreme environments. However, their current synthesis processes are rather complex, requiring extremely high energy input and prolonged time. This study innovatively proposes a new method for directly fabricating HE-UHTCs using high-speed laser cladding technology. By leveraging the extremely high energy density and adjustable energy distribution of the laser, the synthesis of a single-phase high-entropy carbide ceramic (HfTaZrTiNb)C from five refractory metal carbide components (HfC, TaC, ZrC, TiC, and NbC) was successfully achieved. Concurrently, a Ta-rich metal solid solution phase formed in the coating, which effectively improved its toughness. The fabricated coating exhibits a dense microstructure, minimal internal defects, and a well-formed metallurgical interface with the refractory alloy substrate (Ta10W). From the bottom to the top of the coating, the microstructure evolves sequentially from planar grains to columnar grains, then cellular grains, and ultimately to equiaxed grains. Besides, the functionally graded coating with a hard exterior (2050.54 ± 433.68 HV0.5) and a tough interior (3.36 ± 0.56 MPa·m1/2) exhibits strong mechanical resistance. Notably, the coating exhibits regionally differentiated fracture toughness mechanisms. This is primarily attributed to the gradient increase in the content of the Ta-rich metal solid solution phase from the top of the coating towards the substrate. This gradient distribution is a key factor driving the evolution of toughening mechanisms in different regions of the coating.
High-entropy ultra-high temperature ceramics (HE-UHTCs) are a class of emerging functional materials for extreme environments. However, their current synthesis processes are rather complex, requiring extremely high energy input and prolonged time. This study innovatively proposes a new method for directly fabricating HE-UHTCs using high-speed laser cladding technology. By leveraging the extremely high energy density and adjustable energy distribution of the laser, the synthesis of a single-phase high-entropy carbide ceramic (HfTaZrTiNb)C from five refractory metal carbide components (HfC, TaC, ZrC, TiC, and NbC) was successfully achieved. Concurrently, a Ta-rich metal solid solution phase formed in the coating, which effectively improved its toughness. The fabricated coating exhibits a dense microstructure, minimal internal defects, and a well-formed metallurgical interface with the refractory alloy substrate (Ta10W). From the bottom to the top of the coating, the microstructure evolves sequentially from planar grains to columnar grains, then cellular grains, and ultimately to equiaxed grains. Besides, the functionally graded coating with a hard exterior (2050.54 ± 433.68 HV0.5) and a tough interior (3.36 ± 0.56 MPa·m1/2) exhibits strong mechanical resistance. Notably, the coating exhibits regionally differentiated fracture toughness mechanisms. This is primarily attributed to the gradient increase in the content of the Ta-rich metal solid solution phase from the top of the coating towards the substrate. This gradient distribution is a key factor driving the evolution of toughening mechanisms in different regions of the coating.