17 April 2024 in IEEE Transactions on Industrial Informatics
Multiple degrees-of-freedom (multi-DOF) hydraulic manipulators are usually recognized as hard-to-control systems to achieve dynamic trajectory tracking because of strong nonlinearities, uncertainties, and complex couplings within the dynamics. In practice, when the end-effector of the multi-DOF hydraulic manipulator is tracking a given trajectory continuously, some joints may experience frequent stop-and-go or low-speed motions due to its kinematics. In such situations, dynamic friction becomes one of the main factors that affect the control performance. Inadequate compensation for the dynamic friction can result in undesired crawling or oscillatory behaviors of the manipulator. However, it is challenging to make effective compensation of the dynamic friction in control design due to its complicated and nonlinear properties. In this article, motion control of a multi-DOF hydraulic manipulator with extra consideration on the nonlinear friction for dynamic trajectory tracking is proposed. First, to make a more precise compensation of the nonlinear friction force, an improved LuGre model ensuring continuity and differentiability is developed, along with the method for obtaining nominal values of internal friction state based on desired trajectories. Then, a model-based adaptive robust motion controller is developed for the multi-DOF hydraulic manipulator. The nonlinearities and uncertainties of the high-order dynamics are well addressed in the closed-loop system, and the transient and asymptotic tracking performance can be guaranteed in theory. Finally, experimental validation was conducted, and the comparison with existing methods showed the improved tracking performance.
19 November 2025 in IEEE Robotics and Automation Letters
This letter presents the mechatronic design and implementation of a hybrid-driven disc-shaped autonomous underwater vehicle (HD-AUV). The hybrid-driven system integrates a buoyancy adjustment system and propeller thrusters, enabling the HD-AUV to achieve both high maneuverability motion and energy-efficient gliding. These capabilities correspond to two distinct motion modes: AUV mode and glider mode. In AUV mode, the HD-AUV leverages the rotational symmetry of its disc-shaped design to achieve four degree-of-freedom (4-DOF) motion control. This configuration, supported by four propeller thrusters, facilitates high-maneuverability actions, including fixed-point hovering and in-place turning. In glider mode, the integration of rotatable dorsal fins and horizontal propeller thrusters enables the HD-AUV to transition seamlessly between diving and ascending phases without the conventional mass-shifting mechanisms used in torpedo-type gliders. Numerical simulations are conducted to evaluate the steady glide performance of the HD-AUV, focusing on lift-to-drag ratios and hydrodynamic coefficients. Comprehensive pool experiments, encompassing multi-DOF maneuvers and gentle gliding, demonstrate the exceptional locomotion capabilities of the HD-AUV and validate the accuracy of the proposed dynamic model. These hybrid motion modes hold significant promise for underwater operations in complex seafloor environments.