1 March 2005 in Advances in Colloid and Interface Science
Membrane emulsification (ME) is a relatively new technique for the highly controlled production of particulates. This review focuses on the recent developments in this area, ranging from the production of simple oil-in-water (O/W) or water-in-oil (W/O) emulsions to multiple emulsions of different types, solid-in-oil-in-water (S/O/W) dispersions, coherent solids (silica particles, solid lipid microspheres, solder metal powder) and structured solids (solid lipid microcarriers, gel microbeads, polymeric microspheres, core-shell microcapsules and hollow polymeric microparticles). Other emerging technologies that extend the capabilities into different membrane materials and operation methods (such as rotating membranes, repeated membrane extrusion of coarsely pre-emulsified feeds) are introduced. The results of experimental work carried out by cited researchers in the field together with those of the current authors are presented in a tabular form in a rigorous and systematic manner. These demonstrate a wide range of products that can be manufactured using different membrane approaches. Opportunities for creation of new and novel entities are highlighted for low throughput applications (medical diagnostics, healthcare) and for large-scale productions (consumer and personal products).
1 October 2001 in Powder Technology
1 April 2010 in Particuology
1 July 2006 in Journal of Colloid and Interface Science
A new rotating membrane emulsification system using a stainless steel membrane with 100 microm laser drilled pores was used to produce oil/water emulsions consisting of 2 wt% Tween 20 as emulsifier, paraffin wax as dispersed oil phase and 0.01-0.25 wt% Carbomer (Carbopol ETD 2050) as stabilizer. The membrane tube, 1 cm in diameter, was rotated inside a stationary glass cylinder, diameter of 3 cm, at a constant speed in the range 50-1500 rpm. The oil phase was introduced inside the membrane tube and permeated through the porous wall moving radially into the continuous phase in the form of individual droplets. Increasing the membrane rotational speed increased the wall shear stress which resulted in a smaller average droplet diameter being produced. For a constant rotational speed, the average droplet diameter increased as the stabilizer content in the continuous phase was lowered. The optimal conditions for producing uniform emulsion droplets were a Carbomer content of 0.1-0.25 wt% and a membrane rotational speed of 350 rpm, under which the average droplet diameter was 105-107 microm and very narrow coefficients of variation of 4.8-4.9%. A model describing the operation is presented and it is concluded that the methodology holds potential as a manufacturing protocol for both coarse and fine droplets and capsules.
4 April 2005 in IEEE Sensors Journal
This paper presents the development of a new electrical impedance tomography system for online measurement of two-phase flows with axial velocities up to 10 ms/sup -1/. The system is designed in a modular fashion and can consist of several data acquisition modules and computing modules. The data acquisition module includes a voltage controlled current source with a direct-current-restoration circuit, an equal-width pulse synthesizer unit and a synchronized digital demodulation unit. A new concept of current switching scheme is developed to enhance the ac coupling speed. The computing module includes a digital signal processor (TMS320C6202/6713) with memory, multichannel buffered serial ports and an IEEE1394 communication interface. Several DSP modules can be pipelined for a series of tasks ranging from measurement control to image reconstruction to flow velocity implementation. The performances have been tested and some trial results are reported. A data acquisition speed of 1164 dual-frames (2.383 million data points) per second has been achieved with a root mean square error less than 0.6% at 80 kHz in static test application. An application in the measurement of vertical oil-in-water pipe flow is reported.
1 April 2003 in Chemical Engineering Research and Design