29 September 2021 in ACS Applied Materials & Interfaces
27 July 2018 in Journal of Materials Chemistry A
A hole transport layer (HTL) plays a key role in efficient hole extraction and transfer in inverted planar perovskite solar cells. A 10–20 nm thick poly (3,4-ethylenedioxythiphene):poly(styrenesulfonate) (PEDOT:PSS) layer is the most popular HTL in such a device structure. But is it essential to construct such a thick PEDOT:PSS layer? To address this question, herein self-assembled PEDOT:PSS monolayers are obtained on the indium tin oxide (ITO) surface through a facile water rinsing process. Perovskite solar cells with water rinsed PEDOT:PSS as a HTL yield improved power conversion efficiency (PCE) from 13.4% to 18.0%, compared with the control cells with as-cast PEDOT:PSS. The main contribution is from the open-circuit voltage (Voc) and fill factor (FF). Characterization indicates that the majority of PEDOT:PSS is washed away, but an ultra-thin layer of PEDOT:PSS can attach strongly onto ITO via In–O–S chemical bonds between the PSS chain and ITO. Subsequently, PEDOT and PSS form a bilayered structure due to Coulomb interaction. Such an arrangement induces an oriented electric field from positively charged PEDOT to negatively charged PSS, which can accelerate the process of hole extraction. Moreover, the oriented arrangement of PEDOT:PSS monolayers provides higher work function and stronger hydrophobicity, leading to the enhancement in Voc and stability in the ambient environment. This work suggests that there is still room for the efficiency improvement of perovskite solar cells by optimizing the traditional functional layers.
20 April 2020 in Nano-Micro Letters
Due to its ultra-fast charge/discharge rate, long cyclic life span, and environmental benignity, aqueous supercapacitor (SC) is considered as a proper next-generation energy storage device. Unfortunately, limited by undesirable water electrolysis and unreasonable electrode potential range, aqueous SC normally generates a narrow cell voltage, resulting in a low energy density. To address such challenge, enormous efforts have been made to construct high-voltage aqueous SCs. Despite these achievements, the systematic reviews about this field are still rare. To fill this knowledge gap, this review summarizes the recent advances about boosting the cell voltage of aqueous SCs. From the viewpoint of electrode, doping alkali cations, modulating the electrode mass ratio, and optimizing the surface charge density are regarded as three effective pathways to achieve this goal. However, adjusting the appropriate pH level, introducing redox mediators, and constructing “water-in-salt” electrolyte are other three universal routes from the electrolyte aspect. Furthermore, it is also effective to obtain the high-voltage aqueous SCs through asymmetric design, such as designing asymmetric SCs. The confronting challenges and future development tendency towards the high-voltage aqueous SCs are further discussed.
6 December 2017 in ACS Applied Materials & Interfaces
5 October 2020 in Advanced Functional Materials