The popularity of using vertical take-off and landing unmanned aerial systems continues to rise. Although the use of these devices seems to be almost limitless, the main drawback is still the battery capacity and the need to replace or recharge it several times per hour. This article provides a technical overview of the development of an experimental mechatronic system for automatic drone battery management called Droneport. It was developed as a system with a landing platform, automatic battery exchange and recharging outside the drone, allowing a quick return to the mission. The first part presents its mechanical design, installed instrumentation and software environment. The next part is devoted to the description of the individual hardware components, highlighting the specific problems that had to be solved to optimize size, weight and robustness requirements. The final section summarizes our observations regarding the contribution of this tool to the autonomy of drones or UAVs in general.
The paper deals with the development of an experimental mechatronic system for battery management of drones called Droneport. It was developed as an automatic system with battery swapping and recharging feature set outside the drone, allowing a quick return to a mission. The first part presents its mechanical design, installed instrumentation and software environment. The next section is dedicated to the description of the individual hardware components, highlighting particular problems that had to be solved to optimize the size, weight and fulfill robustness demands. The last section summarizes our observations regarding the contribution of this tool to the drone or UAV autonomy in general.
The paper deals with the path planning of hyper-redundant manipulator as a part of NDT technology for circumferential welds on pipe with limited accessibility. Ability to move along the tested weld in very confined space is the major feature which is considered for NDT inspections. Documentation of such a weld and nearby environment typically contains a drawing with Developed view. Such a drawing is beneficially used as a basic input for path planner. The redundant degrees of freedom of manipulator are then used for optimization the robot body shape. The method for intuitive path planning in constrained environment was developed. It is based on obstacle definition via attractive and repulsive objects described in Developed view together with weighted least norm algorithm for robot body fitting around the pipe regarding obstacle avoidance. The proposed planning method and fitting algorithm were tested and proved via virtual robot model with 13 degrees of freedom.