1 January 2010 in Bioresource Technology
1 October 2020 in Science of The Total Environment
1 August 2013 in Dalton Transactions
This work describes a simple one-step synthesis of Mn3O4 nanoparticles by thermal decomposition of [Mn(acac)2] (acac = acetylacetonate) using imidazolium ionic liquids (ILs) and a conventional solvent, oleylamine, for comparison. The Mn3O4 nanoparticles were characterized by XRD, ATR-FTIR, TEM, Raman, UV/VIS and magnetometry techniques. The addition of 1-n-butyl-3-methylimidazolium bis(trifluoromethylsulfonyl)amide IL (BMI·NTf2) yielded a smaller particle size (9.9 ± 1.8 nm) with better dispersion and more regular sizes than synthesis using oleylamine as the solvent (12.1 ± 3.0 nm). The complete conversion of the precursor to Mn3O4 nanoparticles occurred after 96 h at 180 °C for the reaction performed in BMI·NTf2. However, under these reaction conditions in oleylamine, no precursor was detected, but two different phases were observed: a major phase corresponding to Mn3O4 and a minor phase corresponding to MnO2. Magnetometry revealed that Mn3O4 nanoparticles synthesized in either oleylamine or BMI·NTf2 exhibited ferrimagnetic behavior at low temperatures, whereas they were paramagnetic at room temperature. As expected, the blocking temperature and the coercivity decreased with the size of nanoparticles. Our results demonstrate that reaction conditions such as time, and the nature of the ionic liquid play important roles in determining the size of Mn3O4 nanoparticles.
2 January 2013 in Chemical Communications
A simple one-step method based on the sputtering deposition of Ni nanoparticles (NP) has been developed for the production of magnetic biocatalysts, avoiding the complications and drawbacks of methods based on chemical functionalisation or coating of magnetic NP. This new technique provided high levels of recovery, reusability and catalytic activity for the lipase–Ni biocatalyst.
1 January 2015 in International Journal of Biological Macromolecules
23 January 2012 in Enzyme Research
This study aimed to develop an optimal continuous process for lipase immobilization in a bed reactor in order to investigate the possibility of large-scale production. An extracellular lipase of Pseudozyma hubeiensis (strain HB85A) was immobilized by adsorption onto a polystyrene-divinylbenzene support. Furthermore, response surface methodology (RSM) was employed to optimize enzyme immobilization and evaluate the optimum temperature and pH for free and immobilized enzyme. The optimal immobilization conditions observed were 150 min incubation time, pH 4.76, and an enzyme/support ratio of 1282 U/g support. Optimal activity temperature for free and immobilized enzyme was found to be 68°C and 52°C, respectively. Optimal activity pH for free and immobilized lipase was pH 4.6 and 6.0, respectively. Lipase immobilization resulted in improved enzyme stability in the presence of nonionic detergents, at high temperatures, at acidic and neutral pH, and at high concentrations of organic solvents such as 2-propanol, methanol, and acetone.