Center for Environmental Measurement and Modeling, Air Methods and Characterization Division, U.S. EPA, 109 T.W. Alexander Drive, Research Triangle Park, North Carolina27711, United States
Auto-generated profile, based on publicly available information
M. Ariel Geer Wallace
Center for Environmental Measurement and Modeling, Air Methods and Characterization Division, U.S. EPA, 109 T.W. Alexander Drive, Research Triangle Park, North Carolina27711, United States
Normal breathing for healthy humans is taken for granted; it occurs without conscious effort using ambient (1-atmosphere) pressure with 21% oxygen (O 2 ) concentration. The body automatically adjusts for stress, exercise, altitude, and mild disease by increasing the volume and frequency of breathing. Longer term adaptations for exercise and altitude include increases in red blood cell counts and higher concentrations of capillaries in muscle tissue. When more challenging external environmental conditions or pulmonary illnesses exceed the capability for these adaptations, the human system requires technology to maintain sufficient ventilation to preserve life. On the environmental side there are two conditions to be addressed: toxicity of the surrounding atmosphere and changes in external pressure and O 2 concentration. On the medical side, mechanisms for assisting breathing include O 2 supplementation at ambient pressure, positive pressure/flow without additional O 2 , or a combination of both. This overview describes the various technologies applied to maintaining a safe breathing environment. Topics for environmental intervention include filter-based and flowing air-supply masks for toxic environments (occupational and laboratory protection), and on-demand gas supply systems for firefighters, self-contained underwater breathing apparatus divers, and altitude (high performance aircraft, spacecraft) applications. The topics for medical intervention include nasal cannula, continuous positive airway pressure, and medical ventilators. The primary purpose of this article is to provide a basic understanding of normal human breathing and the adaptation of breathing in different environments using available technologies.
Given the extent to which per- and polyfluoroalkyl substances (PFAS) are used in commercial and industrial applications, the need to evaluate treatment options that reduce environmental emissions and human and ecological exposures of PFAS is becoming more necessary. One specific chemical class of PFAS, fluorotelomer alcohols (FTOHs), have vapor pressures such that a significant fraction is expected to be present in the gas-phase even at ambient temperatures. FTOHs are used in a variety of PFAS applications, including synthesis and material coatings. Using two complementary mass spectrometric methods, the use of calcium oxide (CaO) was examined as a low temperature and potentially low-cost thermal treatment media for removal and destruction of four gas-phase FTOHs of varying molecular weights. This was accomplished by assessing the removal/destruction efficiency of the FTOHs and the formation of fluorinated byproducts as a function of treatment temperature (200 – 800 °C) in the presence of CaO compared to thermal-only destruction. During the treatment process, there is evidence that other PFAS compounds are produced at low temperatures (200 – 600 °C) as the primary FTOH partially degrades. At temperatures above 600 °C, thermal treatment with CaO prevented the formation or removed nearly all these secondary products.
Per- and polyfluoroalkyl substances (PFAS) are a unique class of chemicals synthesized to aid in industrial processes, fire-fighting products, and to benefit consumer products such as clothing, cosmetics, textiles, carpets, and coatings. The widespread use of PFAS and their strong carbon-fluorine bonds has led to their ubiquitous presence throughout the world. Airborne transport of PFAS throughout the atmosphere has also contributed to environmental pollution. Due to the potential environmental and human exposure concerns of some PFAS, research has extensively focused on water, soil, and organismal detection, but the presence of PFAS in the air has become an area of growing concern. Methods to measure polar PFAS in various matrices have been established, while the investigation of polar and nonpolar PFAS in air is still in its early development. This literature review aims to present the last two decades of research characterizing PFAS in outdoor and indoor air, focusing on active and passive air sampling and analytical methods. The PFAS classes targeted and detected in air samples include fluorotelomer alcohols (FTOHs), perfluoroalkane sulfonamides (FASAs), perfluoroalkane sulfonamido ethanols (FASEs), perfluorinated carboxylic acids (PFCAs), and perfluorinated sulfonic acids (PFSAs). Although the manufacturing of perfluorooctanoic acid (PFOA) and perfluorooctane sulfonic acid (PFOS) has been largely phased out, these two PFAS are still often detected in air samples. Additionally, recent estimates indicate that there are thousands of PFAS that are likely present in the air that are not currently monitored in air methods. Advances in air sampling methods are needed to fully characterize the atmospheric transport of PFAS.
2 June 2023 in Journal of the Air & Waste Management Association
During thermal processes utilized in affixing fluoropolymer coatings to fibers and fabrics, coating components are vaporized. It is suspected that per- and polyfluoroalkyl substances (PFAS) from the dispersions may undergo chemical transformations at the temperatures used, leading to emitted PFAS thermal byproducts. It is important to characterize these emissions to support evaluation of resulting environmental and health impacts. In this study, a bench-scale system was built to simulate this industrial process via thermal application of dispersions to fiberglass utilizing relevant temperatures and residence times in sequential drying, baking, and sintering steps. Experiments were performed with two commercially available dispersions and a simple model mixture containing a single PFAS species (6:2 fluorotelomer alcohol [6:2 FTOH]). Vapor-phase emissions were sampled and characterized by several off-line and real-time mass spectrometry techniques for targeted and non-targeted PFAS. Results indicate multiple PFAS thermal transformation products and multiple non-halogenated organic species were emitted from the exit of the high temperature third (sintering) furnace when 6:2 FTOH was the only PFAS present in the aqueous mixture. This finding supports the hypothesis that temperatures typical of these industrial furnaces may also induce chemical transformations within the fluorinated air emissions. Experiments using the two commercial fluoropolymer dispersions indicate air emissions of part-per-million by volume (ppmv) concentrations of heptafluoropropyl-1,2,2,2-tetrafluoroethyl ether (Fluoroether E1), as well as other PFAS at operationally relevant temperatures. We suspect that E1 is a direct thermal decomposition product (via decarboxylation) of 2,3,3,3-tetrafluoro-2-(heptafluoropropoxy)propanoic acid (commonly referred to as HFPO-DA) present in the dispersions. Other thermal decomposition products, including the monomer, tetrafluoroethene, may originate from the PFAS used to stabilize the dispersion or from the polymer particles in suspension. This study represents the first researcher-built coating application simulator to report nontargeted PFAS emission characterization, real-time analyses, and the quantification of 30 volatile target PFAS.