9 August 2023 in Journal of the Mechanics and Physics of Solids
28 December 2024 in Journal of the Mechanical Behavior of Biomedical Materials
Extrusion-based 3D bioprinting is one of the most promising and widely used technologies in bioprinting. However, the development of bioprintable, biocompatible bioinks with tailored mechanical and biological properties remains a major challenge in this field. Alginate dialdehyde-gelatin (ADA-GEL) hydrogels face these difficulties and enable to tune the mechanical properties depending on the degree of oxidation (% DO) of ADA. Here, we present a holistic approach for characterizing the influence of the % DO on the mechanical properties of ADA-GEL hydrogels under multiple loading modes, compression, tension, and torsional shear in the large-strain regime. We evaluate complex mechanical characteristics including nonlinearity, hysteresis, conditioning, and stress relaxation. We calibrate hyperelastic material models to determine the corresponding material parameters inversely. Our results confirm that decreasing the % DO of ionically crosslinked ADA-GEL hydrogels leads to an increase in stiffness, more distinct nonlinearity, more pronounced hysteresis, and minor preconditioning effects, while the relaxation behavior is slightly affected. The fabrication technique - molding or printing - does only slightly affect the complex mechanical properties and stress relaxation behavior. Ionically and enzymatically dual-crosslinked ADA-GEL hydrogels showed higher stresses during cyclic loading and less viscous effects during stress relaxation in all three loading modes. We conclude that the % DO and the crosslinking procedure are crucial parameters to tune the mechanical behavior of ADA-GEL hydrogels. Careful choice of these parameters might facilitate the fabrication of biomaterials that closely mimic the properties of native tissues for advanced tissue engineering applications.
5 December 2025 in Advanced Healthcare Materials
Collagen type I hydrogels, which self‐assemble into 3D fiber networks, are commonly used for cell culture and tissue engineering applications. Collagen hydrogels replicate the nonlinear stress–strain relationship of collagenous tissue under extension. However, they buckle and soften under compression, whereas natural tissue exhibits significant stiffening due to the presence of cells and other matrix components. To more closely mimic the mechanical properties of natural tissue, varying concentrations of the basement membrane extract Matrigel are added to collagen. The stress–strain relationship of the resulting composite hydrogels is then analyzed under compression, tension, and shear. It is found that the addition of Matrigel increases the stiffness and reduces the compression‐tension asymmetry. This can be explained by a reduced degree of freedom for collagen fiber buckling due to the constraints imposed by the surrounding fine‐meshed Matrigel network. Consistent with this explanation, it is found that the collapse of composite hydrogels under uniaxial strain decreases with increasing concentration of Matrigel and other filler materials, such as alginate. Taken together, by adjusting the ratio of Matrigel to collagen, the mechanical compression‐tension asymmetry and nonlinearity of composite hydrogels can be tuned to more closely mimic natural tissue and tailor cell behavior.