School of Automation, Key Laboratory of Measurement and Control of Complex Systems of Engineering, Ministry of Education, Institute of Intelligent Unmanned Systems, Southeast University, Nanjing, China
Auto-generated profile, based on publicly available information
Weile Chen
School of Automation, Key Laboratory of Measurement and Control of Complex Systems of Engineering, Ministry of Education, Institute of Intelligent Unmanned Systems, Southeast University, Nanjing, China
The consensus problem for second-order multiagent systems based on nonsmooth sampled-data control is considered. First, a continuous-time nonsmooth consensus protocol is proposed, which can realize the consensus of systems in a finite time when the external disturbance is absent. Next, based on the sampled data and the zero-order holder, a new discrete-time nonsmooth protocol is proposed. Considering external disturbances, the explicit relationship between the ultimate boundary of errors of any two agents and the sampling period and external disturbance is given with the Lyapunov method and graph theory, which theoretically shows that the nonsmooth control algorithm has a stronger ability to resist external disturbance than the smooth control algorithm. Finally, a simulation example shows the superiority of the nonsmooth consensus algorithm over a smooth consensus algorithm.
6 June 2024 in IEEE/CAA Journal of Automatica Sinica
Dear Editor, This letter considers the formation control of multiple mobile robot systems (MMRS) that only relies on the local observation information. A new distributed finite-time observer is proposed for MMRS under directed graph to estimate the relative information between each follower robot and the leader robot. Then the formation control problem is transformed into the tracking problem and a finite-time tracking controller is proposed based on the robot model feature.
12 December 2024 in IEEE Transactions on Industrial Informatics
Force control strategies are crucial for robot manipulators to effectively adapt to diverse tasks. However, employing force sensors to measure force/torque information significantly increases the cost of robotic systems. Hence, it is crucial to delve into sensorless force/torque estimation techniques. Given the low precision of traditional force estimation algorithms, this article presents a novel algorithm to improve the torque estimation precision of robot manipulators' joints. First, based on the dynamic model, a finite-time sliding-mode torque observer is designed for the robot manipulators via a step-by-step method. A new Lyapunov function is constructed to prove the finite-time convergence of the closed-loop system. Second, in the presence of sampling noise, the robustness of the proposed finite-time torque observer is analyzed. Finally, simulation and experimental results validate the effectiveness of the proposed algorithm.
3 May 2024 in IEEE Transactions on Industrial Electronics
In this article, we investigate the problem of fast finite-time target tracking control of the inertially stabilized platform (ISP) with a camera that mounted on a mobile robot. At first, the kinematics of the onboard ISP target tracking system is established by the geographic coordinate and pinhole camera model, which includes the state-dependent uncertainties and external disturbances. Then, based on the image information captured by camera, a continuous image-based fast finite-time control algorithm is designed for target tracking. Rigorous analysis proves that the target can be tracked at the center of camera's view in finite time in the absence of disturbances. In the presence of disturbances, the tracking error can converge to a region around the origin in finite time. Simulation and experimental comparisons are presented to confirm the efficiency of the proposed method.
25 November 2020 in Journal of Control Science and Engineering
Based on the intelligent bidirectional interactive technology, this paper studies the flexible working mode and optimal power consumption strategy of several typical power consumption loads including energy storage equipment. Based on the real-time price scheme, the objective function and constraints are obtained, and the adaptive algorithm for beetle swarm optimization with variable whisker length is used to optimize so that the electric equipment can automatically change its power load through the intelligent terminal and even work in the way of reverse power transmission. The proposed optimal scheduling algorithm can not only maximize the interests of users but also ensure the minimum peak to average ratio so as to realize peak shaving and valley filling. Simulation results verify the effectiveness of the algorithm.
29 May 2026 in IEEE Transactions on Industrial Electronics
Classical phase-locked loops (PLLs) employing proportional–integral (PI) loop filters achieve only asymptotic convergence, resulting in limited transient speed and theoretically infinite settling time. To address these limitations, this article proposes a nonsmooth loop filter for fast and accurate PLL operation. A rigorous Lyapunov-based analysis is conducted, showing finite-time stabilization under different position reference signal inputs. The proposed nonsmooth PLL is further validated through comparative simulations and experiments conducted on a 2 kW interior permanent magnet synchronous motor (IPMSM) platform, showing faster phase and frequency convergence (up to 27.5% improvement in recovery time under speed changes) and smaller estimation error (up to 32% improvement in position error under speed changes) compared with conventional PI-based PLLs. Owing to its concise structure and analytically verified stability, the proposed nonsmooth PLL is expected to provide a practical and scalable solution for high-performance industrial electronic systems.