8 February 2024 in ACS Catalysis
Ammonia is currently being studied intensively as a hydrogen carrier in the context of the energy transition. The endothermic decomposition reaction requires the use of suitable catalysts. In this study, transition metal Ni on MgO as a support is investigated with respect to its catalytic properties. The synthesis method and the type of activation process contribute significantly to the catalytic properties. Both methods, coprecipitation (CP) and wet impregnation (WI), lead to the formation of Mg1-xNixO solid solutions as catalyst precursors. X-ray absorption studies reveal that CP leads to a more homogeneous distribution of Ni2+ cations in the solid solution, which is advantageous for a homogeneous distribution of active Ni catalysts on the MgO support. Activation in hydrogen at 900 °C reduces nickel, which migrates to the support surface and forms metal nanoparticles between 6 nm (CP) and 9 nm (WI), as shown by ex situ STEM. Due to the homogeneously distributed Ni2+ cations in the solid solution structure, CP samples are more difficult to activate and require harsher conditions to reduce the Ni. The combination of in situ X-ray diffraction (XRD) and operando total scattering experiments allows a structure-property investigation of the bulk down to the atomic level during the catalytic reaction. Activation in H2 at 900 °C for 2 h leads to the formation of large Ni particles (20-30 nm) for the samples synthesized by the WI method, whereas Ni stays significantly smaller for the CP samples (10-20 nm). Sintering has a negative influence on the catalytic conversion of the WI samples, which is significantly lower compared to the conversion observed for the CP samples. Interestingly, metallic Ni redisperses during cooling and becomes invisible for conventional XRD but can still be detected by total scattering methods. The conditions of activation in NH3 at 650 °C are not suitable to form enough reduced Ni nanoparticles from the solid solution and are, therefore, not a suitable activation procedure. The activity steadily increases in the samples activated at 650 °C in NH3 (Group 1) compared to the samples activated at 650 °C in H2 and then reaches the best activity in the samples activated at 900 °C in H2. Only the combination of complementary in situ and ex situ characterization methods provides enough information to identify important structure-property relationships among these promising ammonia decomposition catalysts.
1 January 2023 in Progress in Energy
Efficient storage of hydrogen is one of the biggest challenges towards a potential hydrogen economy. Hydrogen storage in liquid carriers is an attractive alternative to compression or liquefaction at low temperatures. Liquid carriers can be stored cost-effectively and transportation and distribution can be integrated into existing infrastructures. The development of efficient liquid carriers is part of the work of the International Energy Agency Task 40: Hydrogen-Based Energy Storage. Here, we report the state-of-the-art for ammonia and closed CO2-cycle methanol-based storage options as well for liquid organic hydrogen carriers.
19 September 2022 in ChemCatChem
Cracking of ammonia, a hydrogen carrier with high storage capacity, gains increasing attention for fuel cell systems for heavy load transportation. In this work, we studied the influence of metal loading and synthesis temperatures on the properties of Co@Al2O3 catalysts. The combination of in situ bulk characterization methods with in situ surface spectroscopy provides insights into the structure‐property relation of the Co catalyst on the γ‐Al2O3 support. At too high temperatures, the formation of CoAl2O4 during synthesis or during the catalytic reaction itself results in inactive mixed metal aluminium spinels which do not contribute to the catalytic reaction. The amount of ‘active’ Co catalyst thus varies significantly as well as its catalytic activity. The latter is correlated to the size of the reduced Co particles on the alumina support. The experiments also highlight that the state of the catalyst changes after reaction which strongly emphasizes the necessity of in situ studies.
14 October 2023 in Materials Science and Engineering: A
1 June 2026 in Materials Advances
Electrochemical carbon deposition from molten carbonate salts using inert electrodes and no additional catalyst is systematically examined.