Luana Candaten

Luana Candaten

Auto-generated profile, based on publicly available information

Luana Candaten

Universidade Federal de Santa Maria

Research Focus & Metrics

Academic Career Length

10Years (2017-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
7 August 2020 in Research, Society and Development
Verified
Journal Article
Open access
PDF file
DKDebora Klingenberg
Debora Klingenberg
ANAdriana Maria Nolasco
Adriana Maria Nolasco
Ananias Francisco Dias JúniorAnanias Francisco Dias Júnior
Ananias Francisco Dias Júnior
LCLuana Candaten
Luana Candaten
ACAnnie Cavalcante
Annie Cavalcante
ESElias Costa de Souza
Elias Costa de Souza
Urban tropical forest species generate large amounts of wood waste by pruning and removing urban trees, which can be an accessible source of biomass that could be used to generate energy instead of being disposed of irregularly. The objective of this study was to evaluate the potential for energy production of the wood residue of seven species most used in urban forestry in the State of São Paulo, Brazil, by determining the physical, chemical and energetic characteristics. Wood waste of 7 common urban forests species in the State of São Paulo were collected in the city of Piracicaba, characterized (humidity, basic density and bulk density), chemically (extract content, volatile materials, fixed carbon and ash content) and energetically (higher, lower, useful calorific power, density energy and thermogravimetric analysis). The highest value of basic density was found in the species Cenostigma pluviosum (653.76 kg/m³), ​​all species had higher calorific values ​​greater than 19 MJ/kg and the energy density of the species varied between 4.45 to 10,80 GJ/m³. The use of these wood residues for direct combustion is a viable alternative and can be considered as a solution to replace the incorrect disposal, which is still a common practice in many cities in developing countries.

27 October 2023 in Forests
Verified
Journal Article
Open access
PDF file
Diego Lima AguiarDiego Lima Aguiar
Diego Lima Aguiar
GJGeraldo Bortoletto Júnior
Geraldo Bortoletto Júnior
IJIvaldo Pontes Jankowsky
Ivaldo Pontes Jankowsky
LCLuana Candaten
Luana Candaten
ACAnnie Cavalcante
Annie Cavalcante
VMVictor Moutinho
Victor Moutinho
The objective of this study was to evaluate the composition of OSB panels created using the Amazonian species Caryocar villosum Aubl., Erisma uncinatum Warm., and Hymenolobium excelsum Ducke. The OSB was produced using a phenol–formaldehyde adhesive at a ratio of 30:40:30 for each layer. Different mixtures of Amazonian wood and Pinus caribaea var. caribaea. were tested. Physical (water absorption and thickness swelling after 2 and 24 h of immersion in water and non-return rate in thickness) and mechanical (internal bond and parallel and perpendicular static bending) tests were performed. The OSB panels composed of wood mixtures absorbed less water after 2 and 24 h of immersion when compared to the OSB produced using pine wood. After 24 h of immersion in water, the T3 panel (40% Pinus caribaea + 40% Hymenolobium excelsum + 20% Caryocar villosum) presented the lowest absorption value. In terms of swelling in thickness at 2 h and 24 h, the panel composed of 100% pine strands showed the highest swelling value, while the T3 treatment exhibited the lowest swelling value at 2 and 24 h, as well as for the rate of non-return in thickness. Regarding mechanical properties, we observed that all panels exhibited similar resistance for both parallel and perpendicular Modulus of Rupture, as well as parallel and perpendicular Modulus of Elasticity, except for the internal bond, where T3 demonstrated the highest resistance. Additionally, some OSB panels met the requirements of the EN 300 standard for OSB panels.

1 January 2023 in Ciência Rural
Verified
Journal Article
Open access
EEElder Eloy
Elder Eloy
EBEduarda Bandera
Eduarda Bandera
TMTauana de Souza Mangini
Tauana de Souza Mangini
RTRômulo Trevisan
Rômulo Trevisan
LCLuana Candaten
Luana Candaten
LZLaura da Silva Zanchetta
Laura da Silva Zanchetta
This study evaluated the effects of thermal modification at different temperatures and for different durations on the mechanical strength of wood of selected species from an agroforestry system. To this end, three 9-year-old (approximate age) individuals, each from four species of forest trees-Parapiptadenia rigida (Benth.) Brenan, Peltophorum dubium (Spreng.) Taub., Eucalyptus grandis × Eucalyptus urophylla hybrid, and Schizolobium parahyba (Vell.) Blake-were evaluated. After obtaining initial measurements, samples from the four species under went heat treatment for 2 h and 4 h and were subsequently subjected to heat using an oven at temperatures 120°C, 150°C, 180°C, and 210°C; respectively, in addition to the control. For evaluating mechanical strength, the technical standard ASTM D 143-94 was used to obtain the values of the moduli of elasticity and rupture, tension at the proportional limit, and maximum force of the subjects. It was observed that different durations and temperatures altered the mechanical strength of the wood of the four species studied. The 2 h residence time is the most recommended for conducting thermal modification. This procedure modifies the mechanical resistance of wood in a positive manner, with exposure temperatures ranging between 120 ºC and 180 ºC being the most recommended. The thermal treatment carried out for 4 h is not recommended for structural purposes because of the decrease in flexural strength.

1 April 2021 in Engenharia Sanitaria e Ambiental
Verified
Journal Article
Open access
PDF file
RCRodrigo José de Castro
Rodrigo José de Castro
GKGustavo Delmar Kehl
Gustavo Delmar Kehl
LCLuana Candaten
Luana Candaten
GSGermana Davila dos Santos
Germana Davila dos Santos
PSPaulo Roberto Bairros da Silva
Paulo Roberto Bairros da Silva
Arci Dirceu WastowskiArci Dirceu Wastowski
Arci Dirceu Wastowski
Wood is a renewable material considered eco-friendly and used for various purposes. While wood treated with chromated copper arsenate (CCA) does not deteriorate, its final disposal may entail risks due to the concentration and toxicity of the components. The removal of CCA from wood can be achieved in different ways. This study focuses on the reduction of the concentrations of Cu, Cr, and As chemical species by the electro-removal technique, aiming to obtain biomass with low deleterious potential that would allow multiple uses or safe disposal in landfills. The analytical results showed reductions of 79.5, 87.4, and 81.3% in the mean concentrations of Cu, Cr, and As, respectively. It is worth mentioning the occurrence of the fungus Xylaria sp. after treatment 6 (60 min, 5 g, and 25 V), further suggesting that the method was effective. Samples of these fungi were identified from isolates by culture in medium, DNA extraction, and sequencing of the Internal Transcribed Spacer (ITS) region.

1 January 2020 in Revista Árvore
Verified
Journal Article
Open access
PDF file
EEElder Eloy
Elder Eloy
EBEduarda Bandera
Eduarda Bandera
TMTauana Mangini
Tauana Mangini
LZLaura da Silva Zanchetta
Laura da Silva Zanchetta
RTRômulo Trevisan
Rômulo Trevisan
LCLuana Candaten
Luana Candaten
The cultivation of native and exotic species intercropped in an agroforestry system raises the interest for information on the properties of wood. Therefore, different methods are being tested to improve the technological properties of this material, including drying, which causes changes in the physical and mechanical properties of the wood. The present study investigated the influence of drying on the physical and mechanical properties of wood from tree species grown in an agroforestry system. Parapiptadenia rigida (Benth.) Brenan, Peltophorum dubium (Spreng.) Taub., Eucalyptus grandis W. Hill × Eucalyptus urophylla S.T. Blake (hybrid), and Schizolobium parahyba (Vell.) S.F.Blake were the species selected for the study. Three 9-year-old individuals of each of the species were obtained from an agroforestry system. Thirty wood samples (2.5 × 2.5 × 41 cm) were extracted from each species. The wood samples were divided between temperature treatments; 6 samples were used for each heat treatment (control, 120, 150, 180, and 210 °C), which were then dried for two hours in an oven (with forced air circulation). Following the heat treatment, the mechanical properties of wood samples were evaluated to determine the modulus of elasticity and rupture, the tension in the proportional limit, and maximum force according to the ASTM D-143-94 (2000) standard. Finally, the physical properties of the retractability of the wood samples were evaluated according to the NBR 7190 (ABNT, 1997) standard. Specimens used to analyze this variable came from sections of the wood (sample dimensions: 2.5 × 2.5 × 5 cm) not affected by the static bending test. Our findings indicate that, for all species investigated in this study, drying alters the physical and mechanical properties of the wood, with the most significant changes occurring at temperatures between 120 and 180 °C.

2 August 2023 in Scientia Forestalis
Verified
Journal Article
Closed access
TMTauana de Souza Mangini
Tauana de Souza Mangini
LCLuana Candaten
Luana Candaten
RTRômulo Trevisan
Rômulo Trevisan
EEElder Eloy
Elder Eloy
EBEduarda Bandera
Eduarda Bandera
LZLaura da Silva Zanchetta
Laura da Silva Zanchetta
RESUMO Este estudo teve como objetivo avaliar a taxa e defeitos de secagem ao ar livre de quatro espécies provenientes de um sistema agroflorestal. Para tanto, foram amostrados indivíduos com 11 anos de idade de Parapiptadenia rigida (Benth.) Brenan, Peltophorum dubium (Spreng.) Taub., Eucalyptus grandis x Eucalyptus urophylla e Schizolobium parahyba (Vell.) Blake. As toras abatidas foram encaminhadas ao desdobro primário e posteriormente à mensuração dos defeitos de encanoamento, arqueamento, encurvamento, rachaduras de topo e presença de nós antes da secagem. Em seguida, foram selecionadas três tábuas por espécie, destinadas para o controle da umidade da pilha. A partir da estabilização do teor de umidade os defeitos foram novamente mensurados, sendo a transição da taxa de secagem determinada por meio de regressões lineares múltipla e simples e a taxa de secagem constante, por meio de regressões lineares simples. A maior amplitude de transição da taxa de secagem e, da mesma forma, o tempo para estabilização desse índice, ocorreu no Peltophorum dubium, seguido de Parapiptadenia rigida, Schizolobium parahyba e Eucalyptus grandis x Eucalyptus urophylla. De maneira geral, apesar do elevado número de tábuas com rachaduras de topo, Peltophorum dubium se destacou entre as espécies do sistema agroflorestal, uma vez que evidenciou baixo índice para os defeitos avaliados. Em contrapartida, ainda que Schizolobium parahyba tenha apresentado uma elevada taxa de secagem, o mesmo também exibiu um alto índice de rachaduras de topo, bem como de nós, comprometendo a qualidade do material. Portanto, conclui-se que, o conhecimento das características da madeira é importante para condução da secagem, já que, cada espécie apresenta um comportamento distinto; com esse domínio é possível conduzi-la de maneira correta e obter-se produtos adequados e com mínimos defeitos.