We present a novel air-bridge subwavelength grating reflector with very high reflectivity to be used as a top mirror in a VCSEL structure. We explain the design method, model the structure using both RCWA and FDTD, and predict the characteristics of a Fabry-Perot structure built with this reflector. We describe the fabrication of the suspended grating.
8 August 2007 in IEEE Microwave and Wireless Components Letters
We demonstrate two techniques for creating several narrowband transmission channels within the ultra-wide stopband of a chirped electromagnetic bandgap structure in microstrip technology. In contrast to previous demonstrations which inserted defects into single-frequency-tuned bandgap structures using ground-plane etching, we demonstrate the use of local pi phase-shifts (defects) and "Moire"-type superposition in a sinusoidal chirped bandgap structure having a network topology. We demonstrate the design of 4-to-6-channel filters with lower insertion losses (<5 dB) and broader stopbands than previous approaches in microstrip.
Free-space optical interconnects represent a candidate technology to alleviate some of the interconnection bottlenecks currently experienced by high performance electronic systems at the board to board and backplane level [1,2,3]. The two most widely investigated technologies for free-space optical data transmission are multiple quantum modulators (MQW) and arrays of vertical cavity surface emitting lasers (VCSELs). Although VCSELs have many desirable optical attributes, large arrays of VCSELs which can be hybridly attached to CMOS integrated circuits are not yet available. This has motivated the design of modulator-based systems. Recently a ring-based free-space optical interconnect [4] has been designed for optical backplane applications [1]. In this system optical data transmission is achieved by the use of GaAs multiple quantum modulators (MQW) which are used to modulate an externally generated spot array. Here we describe design and assembly of an optical array generator which is used as provide the spot array for this system. This is referred to as the optical power supply (UPS) module. The ring-based system is designed to be scaleable (to 4 or more boards), modular (to allow easy assembly and maintenance), compact and also robust and misalignment tolerant. The UPS for each stage of the system is designed as a separate module that is pre-aligned and then mounted onto the system with minimal additional adjustments. A kinematic mounting technique has been developed to enable the UPS to be demounted and remounted without further realignment.
Free-space parallel optical interconnects represent a possible solution to the off-chip communication bottleneck. We review developments in this field and compare the performance of some recently demonstrated systems with the projected future requirements of high speed digital systems. We also discuss progress in the area of design methodologies, tolerance analysis and packaging techniques. Manufacturing issues are considered and a comparison is made with other optical interconnect technologies.