Flexible materials capable of transducing mechanical signals into electrical responses underpin advances in wearable systems, soft robotics, and underwater sensing technologies. Ceramic–polymer piezoelectric composites can combine high electromechanical activity with mechanical compliance, but controlling phase distribution and architecture remains challenging. Here, we report an ethanol-assisted freeze-casting strategy that endows soft lead zirconate titanate/polydimethylsiloxane composites with an anisotropic architecture, enabling both high piezoelectric performance and excellent mechanical deformability. The composites achieve a high piezoelectric charge coefficient of 275 pC·N−1, a piezoelectric voltage coefficient of 233 mV·m·N−1, and an energy-harvesting figure of merit of 64.1 pm2·N−1. The composites also exhibit robust mechanical flexibility, sustaining bending with radii below 5 mm, twisting, compressive deformation, and tensile strains up to 60%. The ethanol-assisted route suppresses freeze-induced cracking and improves three-dimensional compositional uniformity. This method offers a scalable and practical route for fabricating high-performance flexible piezoelectric composites for next-generation sensing technologies.
High-temperature dielectric films hold broad prospects in next-generation microelectronics and power systems. However, commercially available dielectric materials for electrostatic energy storage, specifically biaxially oriented polypropylene, suffer from drawbacks such as low energy density, low efficiency, and poor reliability, which limit the application of film capacitors in harsh environments. Herein, a series of naphthalene tetracarboxylic acid dianhydrides were incorporated into polyetherimide (PEI) backbone, thereby modulating the charge transport behavior. Specifically, synergistic regulation of traps and dihedral angles has effectively enhanced the breakdown strength of PEI. At 200 °C, the optimized dielectric film delivers a discharged energy density of 6.00 J cm−3 at an efficiency of 90%, and maintains stable performance over 105 charge-discharge cycles at 300 MV m−1. Multilayer stacked film capacitors prepared from the optimized films exhibit remarkable thermal stability and capacitive performance. This work proposes a feasible strategy for developing dielectric films with remarkable energy storage performance, superior thermal stability, and scalable fabrication capability.