14 March 2022 in ACS Applied Polymer Materials
Potassium-ion batteries are an emerging post-lithium technology that are considered ecologically and economically benign in terms of raw materials’ abundance and cost. Conventional cell configurations employ flammable liquid electrolytes that impose safety concerns, as well as considerable degrees of irreversible side reactions at the reactive electrode interfaces (especially against potassium metal), resulting in a rapid capacity fade. While being inherently safer, solid polymer electrolytes may present a solution to capacity losses owing to their broad electrochemical stability window. Herein, we present for the first time a stable solid-state potassium battery composed of a potassium metal negative electrode, a Prussian blue analogue K2Fe[Fe(CN)6] positive electrode, and a poly(ethylene oxide)-potassium bis(trifluoromethanesulfonyl)imide polymer electrolyte. At an elevated operating temperature of 55 °C, the solid-state battery achieved a superior capacity retention of 90% over 50 cycles in direct comparison to a conventional carbonate-based liquid electrolyte operated at ambient temperature with a capacity retention of only 66% over the same cycle number interval.
13 November 2023 in Batteries & Supercaps
The low melting points of solid polymer electrolytes (SPEs) based on the KTFSI electrolyte salt allow comparatively low operation temperatures (below 50 °C) for K‐ion batteries, unlike their Li or Na counterparts. Unfortunately, for this reason the electrolyte is also rendered mechanically unsuitable in its function to act as a cell separator. Therefore, in this work the use of inorganic nanofillers (Al2O3 and SiO2) is explored with the aim to improve rheological, thermal and cation transport properties of the resulting polymer composite electrolytes. Their electrochemical properties were further examined in K‐metal symmetrical cells and K‐metal/SPE/K2Fe[Fe(CN)6] cells and compared to corresponding liquid electrolyte systems. As a result of particle‐polymer interactions, filler‐containing SPEs showed higher degrees of crystallinity combined with filler polymer interaction and thus improved mechanical integrity in the relevant temperature range of 25–55 °C, while maintaining similar ionic conductivities than a filler‐free sample above the melting temperature. Although plating‐stripping experiments in symmetrical cell setups suggested high cell resistances for various compositions and in some cases even rapid cell failure, Al2O3‐based SPEs generally displayed high capacity retention when cycled against a positive electrode (here Prussian blue analogue K2Fe[Fe(CN)6]) over 100–160 cycles and possibly beyond.