College of Electrical and Information Engineering, State Key Laboratory of Offshore Wind Power Equipment and Wind Energy High-Efficient Utilization, Hunan University, Changsha, China
Auto-generated profile, based on publicly available information
Lin Zhang
College of Electrical and Information Engineering, State Key Laboratory of Offshore Wind Power Equipment and Wind Energy High-Efficient Utilization, Hunan University, Changsha, China
Conventional fixed-gain PI phase-locked loops (PLLs) used in sensorless drive control of permanent magnet synchronous motors (PMSMs) often suffer from slow dynamic response and poor parameter robustness. An improved finite position set PLL (FPS-PLL) which may achieve high dynamic response with low computational burden is proposed in this paper. By calculating the initial iteration value through the Taylor expansion of the arctangent function, the range of initial iteration errors is narrowed, thereby reducing the number of iterations required. The rotor position is then efficiently estimated by Newton iteration. Position estimation accuracy achieves 4.96e-8 rad after just only one iteration. The proposed method provides superior dynamic performance and low computational load without parameter tuning of PLL. The performance of the proposed FPS-PLL have been experimentally investigated and compared with that of the Binary-FPS-PLL and classical PI-PLL using a 1.5 kW interior PMSM (IPMSM). The results of experiment demonstrate the effectiveness of the proposed FPS-PLL under various operating conditions.
1 October 2026 in IEEE Transactions on Industrial Electronics
To address the issues of slow dynamic response and complex parameter tuning associated with the traditional fixed-gain PI phase-locked loop (PLL) in sensorless drives for permanent magnet synchronous motors. An improved finite position set-PLL is proposed. A novel cost function is formulated using Taylor series expansion to achieve global convergence. An optimized search strategy combining the position bisection method and Newton’s iteration was employed, achieving a high-precision rotor position estimation of 2.07e-6 rad with only three iterations. The proposed method enhances the dynamic response performance of the system and reduces the computational burden without complex parameter tuning. The effectiveness of the proposed scheme was experimentally investigated using a 1.5 kW IPMSM laboratory prototype.