Considering the demand for highly sensitive and selective electrochemical sensors, MOF-derived materials and their composites have demonstrated relevant advances in electrochemical sensing, as summarized in this review article.
Environmentally friendly energy sources such as solar and wind power as alternatives to fossil fuels are strategic for meeting the energy needs of an increasingly demanding population, but they are periodic or intermittent in nature, making energy storage devices fundamental for the realization of a sustainable society. Thus, the quest for much higher power and energy dense devices, especially hybrid supercapacitors, as alternatives to lithium-ion batteries, has been scaling up since the combining of the outstanding power density of supercapacitive materials with the high energy density of battery-type materials into a single device. Despite their high resistance, transition metal oxides are promising electrode materials for use in devices, since their rich electrochemistry can be activated by three main strategies to boost the specific charge capacity, charge–discharge and ion diffusion kinetics, and cyclability of devices via: (a) the incorporation of hetero-atoms that generate trimetallic oxides, (b) nanostructuration via hierarchical core@shell furry and mesoporous systems, and (c) combination with other materials to generate nanocomposites. These strategies, especially those leading to highly porous 3D core@shell architecture nanomaterials, are very successful, where trimetallic oxides, and ternary TLDHs and multicomponent systems, realized via the combination of mono- and/or bimetallic oxides and hydroxides, have demonstrated exceptionally good performances as electrode materials, presenting bright new perspectives for the future of hybrid energy storage devices.
The high demand for energy by our society, and consequent large consumption of fossil fuel, is leading not only to its depletion but also to increasing environmental pollution, thus urging the development of clean and renewable energy sources such as based in solar energy and water in a cyclic way, by photoinduced water-splitting and regeneration in fuel cells. This means being in command of the tetra-protonic and tetra-electronic reaction mechanism of the oxygen evolution reaction, a formidable challenge that is starting to be overcome using catalysts based on more abundant and inexpensive elements. Interestingly, the most promising ones in this context are low-cost materials based on NiFe, NiCo and NiV-LDH precursors, highly flexible and tunable materials that would enable large-scale production, storage and utilization in a more convenient and safe manner. In fact, the vast majority of high performance electrocatalysts based on ternary LDHs are being produced by doping of that matrix with Co2+/3+ and V2+/3+/4+ ions to modulate the electronic and structural properties of NiFe-LDH metal sites, thus reducing the OER overpotentials while activating and increasing the concentration of active sites and improving the OER rate. On the other hand, the V ion coordination geometry can be distorted from octahedral to tetrahedral and used to induce very strong electronic effects to the neighboring transition metal ions to adjust the metal–oxygen bond energy in the transition state to the expected optimal value, and optimize the O2 release in the OER process. Finally, nanostructuration and deposition on suitable conducting materials generating nanocomposites can be used as additional strategies to enhance further the conductivity as well as the concentration and number of available active sites, while facilitating the electrolyte diffusion, thus improving their electrocatalytic performances. In short, catalysts for oxygen evolution reaction based on ternary LDHs were reviewed considering their key role in the way to a more sustainable society.
Electrochemical and gas sensors based on MCo 2 O 4 (M = Ni, Fe, Mn, Cu and Zn) materials and their composites have demonstrated relevant advances on the electrochemical sensing, as summarized in this review article.
In this work, electrode materials based on ZnCo2O4for the HER/OER/ORR and energy storage devices were reviewed considering their key multifunctional role in the way to a more sustainable society.