1 July 2014 in Coastal Engineering
21 January 2022 in Applied Ocean Research
21 March 2024 in Coastal Engineering
1 August 2024 in Physics of Fluids
Porous materials are increasingly being used in the design of floating structures in coastal and ocean engineering, but there is a lack of numerical tools that can aid in the design of a movable floating porous structure. To close this gap, the existing volume-averaged numerical model for flow interacting with a fixed porous body was extended to floating scenarios by (1) using the relative velocity in the porous friction force, (2) calculating rigid body motion using volume integral of porous body force, and (3) modifying a dynamic mesh algorithm for a mobile porous body. As a demonstration, the developed model was applied to a porous floating structure consisting of cubically packed uniform spheres. Two sets of model applications were involved. The first set considered three-dimensional flow around a fixed porous block placed beneath the free surface. The measured total force on the block under wave or steady flows was predicted accurately with an error less than 10%. The second set involved a two-dimensional wave interacting with a floating porous block representing a breakwater. For free-floating conditions, the model can accurately predict the dynamic response of the structure, including the time varying movement of its rigid body and the mean drift. For mooring-restrained conditions, the mooring force and wave transmission coefficients were also predicted well with an error less than 20%. The proposed numerical approach can be applied to other floating structures with a rigid volumetric porous body. Future research is also required to study the microscopic pore flows, upon which more detailed parameterization of the porous media can be derived.
27 December 2019 in Journal of Geophysical Research: Oceans
A full‐scale experimental study of acceleration‐skewed oscillatory flow over vortex ripples, which is an approximation of wave‐driven flow over a rippled seabed, was conducted in an oscillatory water tunnel. Three acceleration‐skewed‐flow tests and a reference sinusoidal‐flow tests were involved in this study. In each test, two‐dimensional vortex ripples were generated from a coarse‐sand movable bed, and the flow field was measured with a particle image velocimetry. The dominant feature of phase‐averaged flow is the generation of onshore (offshore) coherent vortices during the onshore (offshore) half‐cycle. The acceleration skewness expedites the offshore‐onshore flow reversal and therefore speeds up the ejection of offshore vortex, while the opposite occurs for the onshore vortex. The ripple‐averaged flow is similar to the acceleration‐skewed turbulent oscillatory flow over a flat bed in terms of leading Fourier harmonics, boundary layer thickness, and cycle‐averaged flow, suggesting a possible analogy between the two. From the aspect of flow turbulence, acceleration skewness elongates the offshore accelerating quarter, so the turbulence embedded in the offshore vortex can be better developed. This, together with a quick ejection process, allows the offshore vortex to carry a significant amount of residual turbulence to the onshore‐side ripple flank, which may even enhance the production of turbulence within the onshore half‐cycle. Some results on pressure field and form drag are also presented in this paper.