21 October 2022 in IEEE Transactions on Instrumentation and Measurement
Camber and toe-in are important alignment parameters of vehicle wheels, which determine the operation stability and safety during vehicle driving. An automatic and accurate measurement method is proposed for camber and toe-in alignment without vision system calibration. Different from the previous target-based vision measurement (TVM) based on the maximum likelihood estimation (MLE), the RVM-DBSC model is proposed to achieve the automatic measurement of camber and toe-in alignment. Furthermore, the camber and toe-in measurement model is established by the maximum a posteriori (MAP) and the alternating direction method of multipliers (ADMM), rather than the traditional MLE. The contrast experiments are performed by the verification instrument, which indicates that the proposed method achieves effectiveness and high accuracy of camber and toe-in measurement.
14 March 2024 in IEEE Transactions on Instrumentation and Measurement
Wheel alignment plays an important role in industrial inspection for vehicle safety. A laser-line-family-orientated method is proposed to achieve the global registration for the shoulder-to-shoulder (SS) and face-to-back (FB) camera group of the alignment measurement system, and to flexibly and accurately solve the on-site convenient registration problem in the large-scale measurement. Moreover, the global & absolute references determination model is built to achieve the 1D-target all-wheel alignment measurement, in the light of the laser-line-family-orientated model. Furthermore, the global registration and 1D-target all-wheel alignment method are experimentally verified on the basis of the global & absolute & physical benchmark by the global & absolute measurement error. The measurement repeatability error of the 1D-target all-wheel alignment of vehicle is also experimentally performed, due to the unknown real values of vehicle-wheel alignment parameters and the virtual axes defining the parameters. The experiments indicate the accuracy, the availability and the practicability of the wheel alignment method.
9 February 2022 in IEEE Transactions on Instrumentation and Measurement
The 3-D reconstruction is of great importance for measuring, inspecting, monitoring, or understanding surface characteristics. Previous active target-based vision methods provide the reconstruction with more than three images for monocular vision, usually using extra external monocular, stereo, or multiview vision to expand the measurement range. This article aims to achieve the reconstruction from the initial image of monocular vision without precalibration. The subpixel centers on the target with groups of three collinear concentric circles in the radial pattern are obtained in the region of interest (ROI) by histogram of oriented gradient (HOG)–support vector machine (SVM), grouped by electromagnetic (EM), and extracted by the Zernike moment (ZM). The intrinsic parameters of the projection of the single image are modeled by the two projections of the general-direction infinity points generated from the collinear centers of the radial pattern. Moreover, the ratio of the cross ratios of CSI and CST features with infinity points is proposed to determine moderate images with small errors for reconstruction. The mutual benchmark model is presented to enlarge the effective measurement range without extra external observation instruments. Moreover, the reconstruction is modeled and further refined in SE(3) to achieve the orthogonality, accuracy, and large measurement range, which are proved by simulation and experimental verification.
11 August 2022 in IEEE Transactions on Instrumentation and Measurement
Accurate measurement of symmetry plane is very important to the research field of industrial detection. A solution model of the symmetry plane of vehicle body is constructed by the improved expectation maximization (IEM) method. The coarse-to-fine process and the M-neighbourhood method are developed to achieve the parallel computing process and enhance the detection efficiency, according to the vehicle point cloud. In order to verify the measurement accuracy, a 3D point-cloud dataset is established with different vehicle bodies. As the vehicle bodies in the dataset derive from program models, the symmetry plane is known in the modeling process. An evaluation method with the projection angles for the vehicle body symmetry plane is described for the wheel alignment measurement benchmark. The method is further compared with other methods, on the basis of the vehicle dataset and evaluation indicators. Moreover, the physical, absolute benchmark of the symmetry plane, which is generated from the high precision rotation-table of the verification instrument, conducts the experimental verification of the solution method of the symmetry plane.
18 November 2025 in IEEE Transactions on Instrumentation and Measurement
Global reconstruction of vehicle is of great significance for evaluating the safety performance of vehicle. To resolve the critical challenges of coordinate unification inaccuracies arising from limited common feature points in non-overlapping fields of view, particularly for face-to-face (FF) cameras with non-overlapping fields of view, we propose a global orientation method based on the rotation collinear concentric circle layout. The establishment of a spatial circular trajectory model in the Lie Algebra se (3) of the special Euclidean group is predicated on the rotation of a one-dimensional concentric circular feature. The method effectively constructs a virtual cylindrical target that spans a substantial spatial scale. Therefore, the established global invariant physical benchmark and global orientation model realize the global accurate orientation of vehicle point clouds. Global reconstruction and verification experiments are performed on non-overlapping vehicle point clouds, which are acquired by a multi-camera system within a large field of view. Experimental results show that the values of RMSE of the proposed method are 1.721 mm, 1.781 mm, and 1.792 mm for different camera combinations. The experiments with the globally physical benchmark indicate the accuracy, availability and applicability of the proposed method in industrial fields.