5 March 2021 in IEEE Transactions on Industrial Electronics
In dual-motor servo systems, several factors seriously affect the tracking performance especially in high-speed and high-accuracy situations, which include machinery flexibilities, torque disturbance, unmodeled dynamics, and motor parameter differences. Given these factors, this article investigates the command filtered backstepping synchronization control (CFBSC) method for a servo system driven by two motors synchronously. Command filters are used to deal with the virtual control signals in backstepping design process to avoid the computational burden causing by repeated derivatives, and a compensation system is applied to reduce the tracking error. Adaptive control is used to compensate the torque disturbance and unmodeled dynamics. In addition, the speed and torque synchronization control signals are designed to guarantee high synchronization performance. The stability of the dual-motor servo system is proved. And the effectiveness of the proposed controller is validated through experiments.
1 August 2023 in IEEE/ASME Transactions on Mechatronics
13 June 2022 in IEEE Transactions on Industrial Informatics
This paper investigates the finite-time command filtered backstepping control problem for dual-motor servo systems. The advantages of the finite-time controller include fast convergence and high robustness which can improve the dynamic and steady control performance of the system. However, the controller often contains nonlinear and exponential terms increasing the computational complexity. Consequently, for the convenience of practical applications, the command filtered technique is utilized to decrease the computational burden causing by repeated derivatives in the backstepping process. Besides, LuGre friction model is used to describe the system friction and a fuzzy logic system is designed to handle it. Only one adaptive parameter is estimated, which makes it suitable for industrial applications. Finally, the stability of the closed-loop system is proved and two experiments are carried out to show the advantages of the proposed scheme.
16 December 2021 in IEEE/ASME Transactions on Mechatronics
The dynamic characteristics of 3-D overhead cranes with double-pendulum effect are complex, which makes the controller design particularly challenging. Besides, in actual conditions, external disturbances cause interference to the system, and the model parameters are uncertain, which further increase the difficulty of controller design. In order to improve the control performance, two composite displacement signals are constructed to increase the coupling relationship of state vectors, and then new error signals and a total mechanicallike energy function are derived. Based on the new energy function, an adaptive control method with enhanced swing suppression is derived. Furthermore, considering the costs of sensors, the velocity signals cannot be obtained directly in many cases of practical application. Hence, auxiliary functions are constructed to replace the velocity feedback signals, and then an improved adaptive tracking control strategy is proposed. Theoretical analysis and experimental results prove that the proposed method can fulfill the control task. Its control result is significantly better than that of the comparison methods. Meanwhile, the experimental results in three different scenarios verify the strong robustness of this method.
23 March 2020 in IEEE Industrial Electronics Magazine
Motion-control technologies are at the core of multiple mechatronic products and applications. Wherever actuated motion takes place in machines and components, either position or force setting (or trajectory tracking), or even a combination of both, are demanded from the control system. In high-performance mechatronic systems, including micro- and/or nanoscale motion (such as data-storage devices, machine tools, manufacturing tools for electronics components, and industrial robots), the required specifications in motion performance, such as response/settling time and trajectory/settling accuracy, should be sufficiently achieved [1].
12 July 2012 in IEEE Transactions on Industrial Electronics
This paper presents an initial friction compensation by a disturbance observer which is designed on the basis of a rolling friction model (RFM) for the fast and precise positioning of ball-screw-driven table systems. Rolling friction in the table drive mechanism behaves as a nonlinear elastic component in the microdisplacement region, deteriorating the fine settling performance. The effects of the rolling friction on the positioning, therefore, should be compensated to provide the desired control performance. In the compensator design, a feedback control with a disturbance observer allows the plant system to behave as a nominal one with a robust stability and compensates for the effects of nonlinear friction on the positioning performance. The disturbance observer, however, inherently includes an estimation delay at the starting motion due to low-pass filters and delay components. In this paper, therefore, an RFM is adopted as an initial value compensation of the disturbance observer to compensate for the initial friction behavior, providing the delay-free estimation. The proposed compensation method has been verified by numerical simulations and experiments using a prototype for industrial positioning devices.