18 September 2020 in Progress in Energy
Sodium-ion batteries (SIBs) are one of the most promising alternatives to lithium-ion batteries (LIBs), due to the much more abundant resources of Na compared with Li in the world. Developing SIB technology to satisfy the increased demand for energy storage is therefore a significant task . However, one of the biggest bottlenecks is the design of high-performance and low-cost anode materials, since the graphite anode in commercial LIBs is not suitable for SIBs due to thermal dynamic issues. Hard carbon materials have been regarded as having the greatest potential as anodes in commercial SIBs owing to their excellent cost-effectiveness, but their relatively limited performance compared to the graphite in LIBs as well as the dimness of the sodium storage mechanisms still need further investigation. In this review, we summarize the progress of recent research into hard carbons for SIB applications, including the fundamentals of SIBs, sodium storage mechanisms, structures and the electrochemical performances of different types of hard carbons in SIBs and other types of sodium-based energy storage as well as the main challenges in this field. We aim to provide a general insight into hard carbons and their applications in SIBs, opening up future perspectives and possible research directions.
13 September 2023 in Advanced Materials
Emerging sodium‐ion batteries (NIBs) and potassium‐ion batteries (KIBs) show promise in complementing lithium‐ion battery (LIB) technology and diversifying the battery market. Hard carbon is a potential anode candidate for LIBs, NIBs, and KIBs due to its high capacity, sustainability, wide availability, and stable physicochemical properties. Herein, a series of hard carbons is synthesized by hydrothermal carbonization and subsequent pyrolysis at different temperatures to finely tune their structural properties. When tested as anodes, the hard carbons exhibit differing ion‐storage trends for Li, Na, and K, with NIBs achieving the highest reversible capacity. Extensive materials and electrochemical characterizations are carried out to study the correlation of structural features with electrochemical performance and to explain the specific mechanisms of alkali‐ion storage in hard carbons. In addition, the best‐performing hard carbon is tested against a sodium cathode Na3V2(PO4)3 in a Na‐ion pouch cell, displaying a high power density of 2172 W kg−1 at an energy density of 181.5 Wh kg−1 (based on the total weight of active materials in both anode and cathode). The Na‐ion pouch cell also shows stable ultralong‐term cycling (9000 h or 5142 cycles) and demonstrates the promising potential of such materials as sustainable, scalable anodes for beyond Li‐batteries.
7 January 2022 in Angewandte Chemie International Edition
15 November 2019 in Journal of Materials Chemistry A
Hard carbon materials are regarded as the most promising anode materials for sodium-ion batteries (SIBs) due to their best cost-effectiveness. However, their relatively low specific capacity and initial Coulombic efficiency (ICE) compared with the graphite anode in lithium-ion batteries still limit the energy density for further development. Thus, it is necessary to produce high-performance hard carbon anode materials with high ICE to improve the SIB technology. Here we show the use of usually ignored carbon dots from the supernatant of hydrothermal carbonization (HTC) as anodes for SIBs after directly drying and carbonization. Compared to traditional HTC carbon spheres from the solid phase, the further carbonized carbon dots exhibit an excellent specific capacity of over 300 mA h g−1 with a significantly enhanced ICE of up to 91% at 30 mA g−1 which is among the highest values reported for carbonaceous anodes in SIBs. The superior ICE could benefit a high energy density of 248 W h kg−1 in full cells with the NaNi1/3Fe1/3Mn1/3O2 cathode. This new discovery from the simple traditional method provides new aspects of designing high-performance SIBs in future commercialization.
17 July 2019 in Advanced Functional Materials
24 May 2022 in Carbon Energy
MTMaria‐Magdalena Titirici
+4
Although it has been proven that porous, heteroatomic, and defective structures improve Na storage performance, they also severely affect the initial Coulombic efficiency (ICE) due to the huge irreversible capacity in the first cycle, which always limits the practical application of carbon anodes in commercial Na‐ion batteries (NIBs). Here, we show the successful synthesis of nanocrystalline cellulose and the derivative hard carbons. A series of treatments including acid hydrolysis, hydrothermal carbonization, and high‐temperature pyrolysis help tune the pores, heteroatoms, and defects to achieve an optimized balance between superior ICE and reversible capacity of up to 90.4% and 314 mAh g−1. This study highlights that tailoring the electrode microstructure could be an important strategy in the future design of carbonaceous anode materials for high‐performance Na‐ion batteries.