26 February 2019 in Communications Physics
Distributed energy sources, for example the ambient broadband vibrations, are of great importance for the development of the Internet of Things. However, for multistable vibrational energy harvesters, increasing the number of stable equilibrium states to broaden working frequency bands is very difficult. Here we present a poly-stable vibrational energy harvesting approach capable of achieving an exponentially growing maximum number of stable equilibrium states. Unlike the traditional multistable harvesters relying on an external static magnetic field, the nonlinear dynamical behaviours achieved by the proposed approach are synergetic poly-stable motions without the need of external magnets. Comparison experiments in contrast with a linear harvester demonstrate the working bandwidth widened by a factor of 41.0, the power density increased to 760% and the electricity generation raised to 178%. This demonstration of new multistable energy harvester expands the approach to achieving multistable motion and provides a new design philosophy for nonlinear vibrational energy harvesters.
1 December 2021 in Applied Energy
21 May 2018 in Applied Physics Letters
Vibrational energy harvesters, which are generally based on a single cantilever beam, are mainly effective for excitations perpendicular to the beam. However, typical ambient vibrations are of multifrequency and are multidirectional. To achieve full harvesting of multifrequency vibrational energy in multiple directions, this letter proposes a multidirectional vibrational energy harvester utilizing multimodal vibrations of a double-branched beam that has four natural frequencies below 22 Hz. Comparison experiments in different directions demonstrate an improvement of energy harvesting when this double-branched beam is used. Under horizontal excitation, the maximum open-circuit voltage is increased to 1845%. Under vertical excitation, the average power density is increased over 3800 times. The experimental results indicate that this structural design significantly improves the energy collection efficiency in both horizontal and vertical directions, even with a lighter structural weight.
1 December 2020 in Nano Energy
1 November 2019 in Nano Energy
21 May 2018 in Applied Physics Letters
Harvesting sustainable mechanical energy is the ultimate objective of nonlinear energy harvesters. However, overcoming potential barriers, especially without the use of extra excitations, poses a great challenge for the development of nonlinear generators. In contrast to the existing methods, which typically modify the barrier height or utilize additional excitations, this letter proposes a seesaw-type approach to facilitate escape from potential wells by transfer of internal energy, even under low-intensity excitation. This approach is adopted in the design of a seesaw-type nonlinear piezoelectric energy harvester and the energy transfer process is analyzed by deriving expressions for the energy to reveal the working mechanism. Comparison experiments demonstrate that this approach improves energy harvesting in terms of an increase in the working frequency bandwidth by a factor of 60.14 and an increase in the maximum output voltage by a factor of 5.1. Moreover, the output power is increased by a factor of 51.3, which indicates that this approach significantly improves energy collection efficiency. This seesaw-type approach provides a welcome boost to the development of renewable energy collection methods by improving the efficiency of harvesting of low-intensity ambient mechanical energy.