Nowadays, nanotechnology has become a very attractive subject in Enhanced Oil Recovery (EOR) researches. In the current study, a carbonate system has been selected and first the effects of nanoparticles on the rock and fluid properties have been experimentally investigated and then the simulation and numerical modeling of the nanofluid injection for enhanced oil recovery process have been studied. After nanofluid treatment, experimental results have shown wettability alteration. A two-phase flow mathematical model and a numerical simulator considering wettability alteration have been developed. The numerical simulation results show that wettability alteration from oil-wet to water-wet due to presence of nanoparticles can lead to 8–10% increase in recovery factor in comparison with normal water flooding. Different sensitivity analyses and injection scenarios have been considered and assessed. Using numerical modeling, wettability alteration process and formation damage caused by entrainment and entrapment of nanoparticles in porous media have been proved. Finally, the net rate of nanoparticles’ loss in porous media has been investigated.
27 October 2017 in Korean Journal of Chemical Engineering
Difficulties and constrains of water & gas injection, like unfavorable mobility ratio, gravity override and underride, and early fingering of injected fluid have led to application of water alternating gas (WAG) injection method instead of water flooding. Nanotechnology can be applied to enhance the performance of WAG process by changing microscopic and macroscopic sweep efficiencies of the process.In this study, several experimental works have been completed to investigate the improvement of the efficiency of the WAG method by application of nano-particles in the aqueous phase. The developed water-based nano fluid alternating gas injection effects on the oil recovery were studied by different core flooding tests in carbonated samples and the results were compared to the conventional WAG approach. The medium crude oil sample and plugs were provided from a mature oil field in the Middle East. Silica nano-powder (SiO2) with particle size of 11-14 nm was used to prepare the water-based nano fluid. Several characterization experiments such as Interfacial tension (IFT) and contact angle measurements were performed to study the influences of the new method on the IFT and wettability alteration during flooding.Experimental results demonstrated more than 20% incremental in recovery factor by Nano-WAG process in comparison to the WAG process. Our study showed that adsorption of SiO2 nano particles on the rock surface changed the wettability of the rock from the oil wet to strongly water wet which affects the recovery. In addition, reduction of IFT occurred due to the placement of nanoparticles on the interface of oil and water phases. Our experiments indicated that water-based nano fluid alternating gas injection is a novel potentially feasible process for enhanced oil recovery and can be used in the field applications to overcome the problems of the WAG and enhance the oil recovery.
17 August 2015 in Journal of Geophysics and Engineering
In recent years there has been an increasing interest in water alternating gas (WAG) processes, both miscible and immiscible. Microscopic oil displacement and sweep efficiency of waterflooding and continuous gas injection can be improved by WAG injection. In this work, by designing various scenarios of water and gas injection, WAG injection and simultaneously water and gas injection, the recovery and residual oil saturation obtained by implementing these methods are compared to choose the appropriate method of injection. The results showed that simultaneously the water and gas injection method has the highest recovery but from economic view, WAG process is the best enhanced oil recovery method to increase the recovery. In WAG method, the values of gas oil ratio and water cut are the smallest, so in this case, operational and process facilities problems and their costs are the minimum.