We report on the current-carrying capacity of the nanowires made from the quasi-1D van der Waals metal tantalum triselenide capped with quasi-2D boron nitride. The chemical vapor transport method followed by chemical and mechanical exfoliation were used to fabricate the mm-long TaSe3 wires with the lateral dimensions in the 20 to 70 nm range. Electrical measurements establish that the TaSe3/h-BN nanowire heterostructures have a breakdown current density exceeding 10 MA cm−2—an order-of-magnitude higher than that for copper. Some devices exhibited an intriguing step-like breakdown, which can be explained by the atomic thread bundle structure of the nanowires. The quasi-1D single crystal nature of TaSe3 results in a low surface roughness and in the absence of the grain boundaries. These features can potentially enable the downscaling of the nanowires to lateral dimensions in a few-nm range. Our results suggest that quasi-1D van der Waals metals have potential for applications in the ultimately downscaled local interconnects.
Quasi-1D van der Waals materials, such as transition metal trichalcogenides, have strong covalent bonds in one direction and weaker bonds in crossplane directions. They can be prepared as crystalline nanowires or nanoribbons consisting of 1D atomic threads, i.e., chains. We have examined the current carrying capacity of ZrTe 3 nanoribbons using a set of structures fabricated by the shadow mask method. The bulk crystals were synthesized by the chemical vapor transport method and exfoliated onto Si/SiO 2 substrates. It was found that ZrTe 3 nanoribbons reveal an exceptionally high current density, on the order of ~100 MA/cm 2 , at the peak of the stressing DC current. The low-frequency noise was of 1/f type near room temperature (f is the frequency). The noise amplitude scaled with the resistance, following the trend established for other low-dimensionalmaterials. The high current density in ZrTe 3 can be attributed to the single-crystalnature of quasi-1D van der Waals materials.
Edge-enriched transition metal dichalcogenides (TMDs) like WS2 are promising electrocatalysts for sustainable production of H2 through the electrochemical hydrogen evolution reaction (HER). The reliable and controlled growth of such edge-enriched electrocatalysts at low temperatures has, however, remained elusive. In this work, we demonstrate how plasma-enhanced atomic layer deposition (PEALD) can be used as a new approach to nano-engineer and enhance the HER performance of WS2 by maximizing the density of reactive edge sites at a low temperature of 300 °C. By altering the plasma gas composition from H2S to H2+H2S during PEALD, we could precisely control the morphology and composition, and consequently, the edge-site density as well as chemistry in our WS2 films. The precise control over edge-site density was verified by evaluating the number of exposed edge-sites using electrochemical copper underpotential depositions (Cu-UPD). Subsequently, we demonstrate the HER performance of the edge-enriched WS2 electrocatalyst, and a clear correlation between plasma conditions, edge-site density and the HER performance is obtained. Additionally, using density functional theory (DFT) calculations we provide insights and explain how the addition of H2 to the H2S plasma impacts the PEALD growth behaviour, and consequently, the material properties, when compared to H2S plasma only.