10 April 2018 in IEEE Transactions on Industry Applications
This paper proposes a comprehensive evaluation of stacked revenue generated from grid-connected energy storage systems (ESSs). The stacked revenue from an ESS cannot be calculated by merely aggregating the benefits from various applications (e.g., energy arbitrage, frequency regulation, and outage mitigation) as the ESS may not be available for all types of applications during the same time interval---because a quantity committed to one market may not be committed to another. In this paper, different types of applications for grid-connected ESSs are identified, and a model incorporating component reliability, power system operation constraints, and storage system operation constraints is developed to evaluate the composite revenue generated from these applications. In this model, the types of applications of ESSs are prioritized according to their intended contributions and system operating conditions. Sequential Monte Carlo simulation is used for evaluating value from the reliability improvement and a quadratically constrained linear programming model is built for estimating the maximum revenue from arbitrage and regulation markets. The proposed method is demonstrated on the IEEE reliability test system (IEEE-RTS) with the historical PJM data.
27 February 2019 in IEEE Transactions on Industry Applications
With the development of distributed energy re-sources (DERs) and the increasing flexibility in active distribu-tion networks (ADNs), the economic operation of ADN coordi-nating both generation and demand sides is required to be stud-ied. In this paper, considering the electricity price response of DER, a coordinated operation strategy for ADN is presented based on a bi-level agent framework. DER agent makes their own response based on the technical operability and economic consideration, while ADN agent will finally coordinate each participant by using the interactive benefit prioritization (IBP) principle. The simulation results indicate that the proposed strategy cannot only reduce the power imbalance, but also im-prove the economic operation of ADN. Moreover, consumption of renewable energy is ameliorated as well.
5 November 2018 in IET Generation, Transmission & Distribution
Online transient stability assessment (TSA) is of great necessity for fast awareness of transient instability caused by fault contingencies. In this paper, a non‐parametric statistics based scheme is proposed for response‐based online TSA. A critical clearing time‐based stability margin index is defined as the predictive output and 14 kinds of severity indicators are proposed as input features for the TSA predictor. With no prior knowledge of the correlation structure, the non‐parametric additive model is used as the basis of the predictor. To screen out the weakly correlated indicators and reduce the dimensionality of the input space, two‐stage feature selection is fulfilled by non‐parametric independence screening and group Lasso penalised regression successively. The predictor is then learnt by least‐squares regression in the reduced multi‐feature space. With phasor measurement unit measurements at generator buses, severity indicators can be computed in the real‐time and fast evaluation of post‐fault stability margin can be made by the offline‐trained predictor. The effectiveness of the proposed non‐parametric statistics based scheme is demonstrated in a modified New England 39‐bus system and a practical 756‐bus transmission system in China.
13 November 2019 in IEEE Transactions on Smart Grid
Due to the newly issued standards on distributed energy resources (DERs), the droop-based operation modes ( ${Q}$ – ${V}$ and ${P}$ – ${V}$ droops) become a requirement for all the interconnected DER units at the distribution level. Voltage references of the DER units can be assigned to improve the operational behavior of the distribution system in the smart grid context. This paper presents a novel formulation for optimally setting voltage reference of the droop-based DER units in distribution systems with the objective of minimizing the system ohmic loss. This problem is formulated as a mixed-integer quadratic convex optimization problem in MATLAB and solved by the MATLAB and CPLEX solvers. The IEEE 123-bus system and the EPRI test system Ckt5 are used to validate the proposed formulation. The result obtained from the proposed formulation is compared with the result of the original problem solved by the heuristic method. Based on the numerical study results, system loss can be reduced after the proposed voltage reference assignment. The computational expense of the new formulation is also much lower than that of the heuristic approach.
31 December 2020 in IET Generation, Transmission & Distribution
With the emerging penetration of renewables and dynamic loads, the understanding of grid edge loading conditions becomes increasingly substantial. Load modelling researches commonly consist of explicitly expressed load models and non‐explicitly expressed techniques, of which artificial intelligence approaches turn out to be the major path. This paper reveals the artificial intelligence‐based load modelling technique to enhance the knowledge of current and future load information considering geographical and weather dependencies. This paper presents a recurrent neural network based sequence to sequence (Seq2Seq) model to forecast the short‐term power loads. Also, a feature attention mechanism, which is along channel and time directions, is developed to improve the efficiency of feature learning. The experiments over three publicly available datasets demonstrate the accuracy and effectiveness of the proposed model.
1 June 2020 in IOP Conference Series: Earth and Environmental Science
As the society becomes increasingly energy-conscious these days, enterprises not only make a point of continuous supply for power, but try to improve power utilization efficiency and design scientific power use plans. In this study, the LightGBM algorithm was used to classify the short-term loads of enterprises, and the characteristics of short-term loads were analyzed to realize accurate classification. The research results will be instrumental to the enterprises’ scientific scheduling of power use, thereby improving safety and reliability of the power grid, and providing a strong basis for future grid planning.