We report an up-to-4-fold enhancement in the in-magnetic-field critical current density at 77 K of epitaxial YBa2Cu3O7 films on CeO2-buffered SrTiO3 substrates by 3-MeV Au2+ irradiation. This indicates that irradiation using an industrially practical ion beam, which generally has kinetic energy less than 5 MeV, can provide a substantial increase in the in-field current performance of high-temperature superconductor films. Transmission electron microscopy results show that point-like defects smaller than 6 nm in diameter were created in the films by the irradiation.
Using a high-temperature superconductor, we constructed and tested a model superconducting fault current limiter (SFCL). The superconductor and the vacuum interrupter as the commutation switch were connected in parallel using a bypass coil. When the fault current flows in this equipment, the superconductor is quenched and the current is transferred to the parallel coil because of the voltage drop in the superconductor. This large current in the parallel coil actuates the magnetic repulsion mechanism of the vacuum interrupter. Due to the opening of the vacuum interrupter, the current in the superconductor is broken. By using this equipment, the current flow time in the superconductor can be easily minimized. On the other hand, the fault current is also easily limited by large reactance of the parallel coil
Many alternative energy power generation systems create DC electricity. Also, many devices consume DC converted from AC. Therefore, it may be possible to reduce conversion losses and CO2 emissions by adopting DC distribution. We assume that superconducting cables will be used for dc distribution because their electrical resistance is almost zero. However, if a superconducting cable is adopted, it is of great concern that if an excessive current flows because of, for instance, a short circuit, then there is a possibility that this current cannot be interrupted by a circuit breaker alone. We propose that the fault current be limited by a superconducting fault-current limiter (SFCL) and that this limited current is then interrupted by a DC circuit breaker. In this paper, we have separately investigated the SFCL and DC breaker and their use in combination.
1 October 2004 in Physica C: Superconductivity and its Applications