A novel implementation of 1 bit full adder based on multiplexer cell is being proposed. This paper presents the design of low power full adder based on XOR pass transistor logic and transmission gate for carry. To reduce the transition activity and charge recycling capability we have not connected power supply rail directly instead of that inputs are given directly and this result in great amount of reduction in power consumption. Power is decreased to a substantial amount while transistor count has gone up to 14T rather 12T. Exhaustive and intensive Tanner SPICE simulation is done and it shows that there is saving of power supply by the factor of 30% as compare to 10T and 26% reduction in power as compare to conventional 28-T CMOS adder[1]-[2].
Most modern arithmetic processors are built with architectures that have been well-established in the literature, with many of the latest innovations devoted to special logic circuits and the use of advanced technologies. Specifically, the design of multipliers is critical in digital signal processing applications, where a high number of multiplications are required. We have minimized the number of adders by introducing different compressors. Binary counter property has been merged with the compressor property to develop high order compressors such as 5-3 and 7-3 compressors.
This paper presents an efficient VLSI architecture of a high speed, low power two dimensional Discrete Wavelet Transform (2-D DWT). The proposed work minimizes the resource requirement and complexity of system. Design modules were realized using basic wavelet in HDL language and MATLAB for optimizing the speed and memory requirements. The system is modeled and implemented using Xilinx VirtexE FPGA device. The simulation results obtained through Mentor graphics simulation software. The system computing rate is up to 290 M samples/s and design uses only 34.376ns combinational path delay for 8×8 image size. In this way, the developed design provides very high-speed processing.