7 November 2022 in Nature Energy
CGC. Gervillié-Mouravieff
+5
22 February 2011 in International Journal of Applied Glass Science
11 February 2013 in Journal of the American Ceramic Society
Effect of three aging conditions, in dark, in light, and in light synchronously with load (with load), on the mechanical properties of Te 2 As 3 Se 5 ( TAS ) glass have been investigated through a series of tensile strength (σ) measurements. Relief of σ in three aging conditions could be related to structural relaxation. And the relaxation time almost 1.5 months is well in agreement with our previous results of calorimetric and mechanical properties. Compared with dark condition, photoinduced effect makes the relief of σ more obvious, but load effect makes the σ to be stronger in direction of testing. Thus, we suggest that, to keep fibers with good σ, they should be stored in dark and with load.
1 January 2004 in Environnement, Ingénierie & Développement
Infrared optical fibers based on chalcogenides are investigated to optimize their transmission in the infrared optical range and they are used for in situ detection of pollutant in groundwater. The pilot scale measurements proved that a Te2As3Se5 (TAS) glass fiber permits access to the absorption line positions of classic pollutants like tetrachloroethylene or dichlorobenzene. Moreover, it has been shown that the original design of the fiber enables detection of weak concentrations of pollutants down to 1 ppm. The experiments led in "real world" conditions proved that such a sensor is able to discriminate simultaneously several pollutants and permit to follow the general evolution of their concentration versus time. Finally, in the future, this technique could become an alternative method to the classical chromatography analyses, avoiding then the withdrawals. Des fibres optiques originales, transparentes dans l'infrarouge, sont développées au laboratoire à partir de verres de chalcogénures appartenant au système ternaire Te, As, Se. L'objectif de ce travail est de montrer le potentiel de telles fibres en tant que capteurs optiques pour analyser les polluants dans les eaux usées. Pour cela des campagnes de mesures ont été réalisées en aquifère artificiel et naturel en utilisant le tétrachloréthylène et le dichlorobenzène comme polluant. Il a été montré que la sensibilité du capteur est de l'ordre du ppm (1 mg.L-1) et qu'un suivi d'évolution de concentrations au cours du temps est envisageable in situ, sans prélèvement ni conditionnement.