Xibo Hao

Xibo Hao

Auto-generated profile, based on publicly available information

Xibo Hao

College of Textiles, Donghua University, China

Research Focus & Metrics

Academic Career Length

9Years (2018-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
7 June 2019 in Industrial & Engineering Chemistry Research
Verified
Journal Article
Closed access
XHXibo Hao
Xibo Hao
YZYongchun Zeng
Yongchun Zeng

30 October 2018 in Textile Research Journal
Verified
Journal Article
Closed access
XHXibo Hao
Xibo Hao
HHHui Huang
Hui Huang
YZYongchun Zeng
Yongchun Zeng
The polymer jet velocity is one of the most basic and critical factors in the melt-blowing process and has always been difficult to measure online. Much effort has been made on the numerical prediction of the jet velocity. However, little work has involved the complex interaction between the air flow and the polymer. Here, the Level-Set method is used to develop the coupled air–polymer two-phase flow model, and to simulate the polymer jet motion in the melt-blowing process considering the coupled effect of the air and polymer. Meanwhile, high-speed photography is adopted in the experiments to verify the simulation results. The x- and y-components of the jet velocities and the whipping amplitude of the jet motion are discussed. The rapid increase of jet velocity and the decrease of jet diameter show that most attenuation of the polymer jet occurred within a distance close to the die (10 mm). Based on the model, the effects of the processing parameters on the jet velocity are examined numerically.

23 February 2022 in Biochemical Engineering Journal
Verified
Journal Article
Closed access
YPYingying Peng
Yingying Peng
YLYonggui Li
Yonggui Li
LLLeigen Liu
Leigen Liu
XHXibo Hao
Xibo Hao
Kai CaiKai Cai
Kai Cai
JTJin Tao
Jin Tao

7 September 2019 in Textile Research Journal
Verified
Journal Article
Closed access
PDF file
XHXibo Hao
Xibo Hao
YYYing Yang
Ying Yang
YZYongchun Zeng
Yongchun Zeng
During melt blowing, most of the polymer jet attenuation occurs in the area within 2 cm from the die, due to the rapid decrease of polymer jet temperature. Therefore, keeping the polymer jet temperature above melting point for a longer time is beneficial for its attenuation. Here, a thermal insulation tube with heating ability was introduced into the air flow field during the melt blowing process. The computational fluid dynamics technique was employed to investigate the effects of the thermal insulation tube on the air flow field. It was found that the thermal insulation tube has enhancing effects on the temperature, velocity, and turbulence kinetic energy of the air flow field. Experiments were conducted to examine the fiber diameters of the final nonwovens, the results of which indicates that a die with a thermal insulation tube can achieve a higher polymer jet attenuation and that the heating effect can further enhance the attenuation. Based on the computational fluid dynamics technique, the effects of the tube diameter and length on the temperature, velocity, and turbulence kinetic energy of the air flow field were investigated.

14 April 2021 in Journal of Industrial Textiles
Verified
Journal Article
Closed access
PDF file
XHXibo Hao
Xibo Hao
ZZZhiying Zhao
Zhiying Zhao
JWJing Wei
Jing Wei
In the past two decades, a number of models have been built to simulate the motion of polymer jet during melt blowing. Unfortunately, the complex interaction between polymer jet and air flow field has been rarely reported. In this work, a phase-field method was applied to simulate the coupling effects between polymer and air flow during melt blowing and the computed results were compared with the results of the model built through level-set method and experimental results. Velocity in the x direction, velocity in the y direction, whipping amplitude and diameter of polymer jet were discussed, respectively. It was found that the velocity predicted by the present model was higher than that predicted by the level-set method. However, both of them are close to the experimental value. The calculated final fiber diameter based on the phase-field method is much closer with the experimental value than that based on the level set method. Based on the model, the effect of polymer surface tension and slot angle on the polymer jet velocity were discussed.

15 September 2026 in Journal of Applied Polymer Science
Verified
Journal Article
Closed access
XHXibo Hao
Xibo Hao
JZJiantao Zhang
Jiantao Zhang
GLGuoliang Liu
Guoliang Liu
SXSheng Xie
Sheng Xie
TXTing Xiao
Ting Xiao
MNMengdu Ni
Mengdu Ni