Lunara Rakhymbay

Lunara Rakhymbay

Auto-generated profile, based on publicly available information

Lunara Rakhymbay

Department of Chemical and Materials Engineering, School of Engineering and Digital Sciences, Nazarbayev University

Research Focus & Metrics

Academic Career Length

6Years (2021-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
19 October 2021 in ECS Meeting Abstracts
Verified
Journal Article
Closed access
LRLunara Rakhymbay
Lunara Rakhymbay
ZBZhumabay Bakenov
Zhumabay Bakenov
AKAishuak Konarov
Aishuak Konarov
Advanced cathode materials play a key role in enhancing the performance of Sodium-ion batteries (SIBs) [1]. Owing to their special layered structure, good electrochemical activity and appealing rate capabilities with stable cycling performance the layered transition metal oxides have been extensively studied. Among them Na2Mn3O7 is one of the promising cathode materials due to the low cost and high capacity [2]. However, the Jahn-Teller effect caused by Mn3+ leads to rapid capacity fading [3]. In this regard, partially substitution of transition metal elements into Mn-rich layered oxides were successfully reported as an effective method to inhibit the Jahn–Teller effect and improve cyclability [4]. This research investigates developing Ni-substituted P1-type Na2Mn3-xNixO7 material where they are synthesized via sol-gel method. The effects of Ni-substitution amount on the structure / morphology and electrochemical properties of the cathode material are systematically studied. Acknowledgment This work was supported by the Nazarbayev University Faculty-development competitive research grant (080420FD1914) "Rational design of new anionic-redox based active material for rechargeable sodium-ion batteries" and by the Ministry of Education and Science of the Republic of Kazakhstan Grant (AP08856179), "Boosting the electrochemical performance of the cathode material for beyond lithium-ion batteries". The author (AK) thank the social policy grant awarded to him by Nazarbayev University. References [1] T. Chen, W. Liu, Y. Zhuo, H. Hu, J. Guo, Y. Liu, J. Yan, K. Liu Mater. Chem. Front., 2019, 3, 2374 [2] J.Yang, M. Tang, H. Liu, X.Chen, Z. Xu, J. Huang, Q. Su, Y. Xia, Small 2019, 15, 1905311 [3] X. Ma, H. Chen, G.J. Ceder, J. Electrochem.Soc. 158 (2011) [4] D. Yuan, W.He, F.Pei, F. Wu, Y. Wu , J. Qian , Y. Cao, X. Ai , H. Yang ,J. Mater. Chem.A 1 (2013) 3895–3899.

9 August 2026 in NNC RK Bulletin
Verified
Journal Article
Open access
PDF file
TIT. K. Idrisova
T. K. Idrisova
AAA. A. Aliakbarova
A. A. Aliakbarova
NBN. B. Bakranov
N. B. Bakranov
NAN. E. Abdyldaeva
N. E. Abdyldaeva
LRL. S. Rakhymbay
L. S. Rakhymbay
DBDina Bakranova
Dina Bakranova
This study analyzes the influence of environmental parameters on the efficiency of photocatalytic processes for air purification. Modern photocatalytic air purification systems utilize light-activated semiconductor materials to generate reactive oxygen species capable of oxidizing pollutants to less toxic products. Experimental data indicate significant progress in the development of photocatalysts based on oxide and heterostructured materials. However, the high activity of photocatalytic materials demonstrated in laboratory conditions is not always reproducible under real-world environmental conditions. The study focused on the influence relative humidity, solar radiation intensity, ambient temperature, and mass transfer conditions on the kinetics of photocatalytic reactions and the availability of active surface sites. It was found that the effect of humidity is nonlinear and is determined by the balance between the formation of hydroxyl radicals and the competing adsorption of water molecules and target pollutants. The efficiency of photocatalytic processes under real-world conditions is determined not only by external environmental parameters but also by the structural design of the systems themselves. Integrated photocatalytic structures, such as fibrous membranes and composite materials, offer the most promise. These structures provide simultaneous filtration, adsorption, and catalytic oxidation of pollutants, as well as improved mass transfer to active sites. This architecture significantly improves the stability and reproducibility of photocatalytic activity under varying environmental conditions. A further evaluation of practical efficiency was conducted, taking into account the formation of reaction intermediates and their potential impact on human health. It was shown that the use of photocatalytic oxidation without preor concomitant filtration can lead to the formation of undesirable byproducts, whereas combined systems provide more thorough air purification and reduce the negative impact on cardiorespiratory parameters. Overall, the obtained results indicate the need to move from a material-based approach to a systems-based design of photocatalytic technologies, taking into account their real-world operating conditions.

27 June 2026 in Herald of the Kazakh-British technical university
Verified
Journal Article
Closed access
LRL. Rakhymbay
L. Rakhymbay
BMBauyrzhan Myrzakhmetov
Bauyrzhan Myrzakhmetov
ADAkbar Dauletbay
Akbar Dauletbay
AKA. Konarov
A. Konarov
Aqueous zinc-ion batteries (AZIBs) are considered as one of the most attractive candidates for safe, low-cost, and environmentally benign energy storage systems. However, the widespread implementation of these systems is still limited due to major problems with the zinc metal anode, including uncontrolled dendrite formation, hydrogen evolution, and the low reversibility of zinc plating and stripping. These issues lead to rapid capacity fading and shortened cycle life, highlighting the urgent need for electrolyte optimization as a simple and effective strategy to overcome anode instability. The purpose of this work was systematically investigated the electrochemical behavior of zinc anodes in a series of electrolytes with different ZnSO 4 -Li 2 SO 4 compositions, namely 2M ZnSO 4 , 1.5M ZnSO 4 + 0.5M Li2SO 4 , 0.5M ZnSO 4 + 1.5M Li 2 SO 4 , 1M ZnSO 4 + 1M Li 2 SO 4 , and 2M Li 2 SO 4 . The electrochemical performance was evaluated using cyclic voltammetry (CV) and galvanostatic charge-discharge tests, and then post-cycle morphological characterization was performed using scanning electron microscopy (SEM). The results show that adding Li 2 SO 4 to the ZnSO 4 electrolyte significantly changes the structure of the Zn 2 + solution, thereby increasing the reversibility of zinc plating/stripping and suppressing dendrite formation. In particular, mixed electrolytes exhibit sharper voltage profiles and reduced polarization compared to single-salt systems. Among the tested formulations, the equimolar mixture of 1M ZnSO 4 + 1M Li 2 SO 4 achieved the most balanced performance, delivering stable cycling and a uniform zinc dendrite morphology. This study highlights electrolyte engineering as a practical and scalable approach to stabilize zinc anodes, providing new insights into the design of high-performance aqueous zinc batteries for future large-scale energy storage applications.

19 October 2021 in ECS Meeting Abstracts
Verified
Journal Article
Closed access
LRLunara Rakhymbay
Lunara Rakhymbay
IKIndira Kurmanbayeva
Indira Kurmanbayeva
NUNurzhan Umirov
Nurzhan Umirov
AKAishuak Konarov
Aishuak Konarov
ZBZhumabay Bakenov
Zhumabay Bakenov

22 November 2024 in ECS Meeting Abstracts
Verified
Journal Article
Closed access
LRLunara Rakhymbay
Lunara Rakhymbay
AKAishuak Konarov
Aishuak Konarov
Nowadays sodium-ion batteries (SIBs) are attracting significant interest due to environmentally abundant and cost-effective sodium sources and are projected as an alternative to Li-ion batteries [1]. Getting from lithium-ion batteries to sodium-ion batteries presents many obstacles with regards to material advancement and comprehension of the underlying mechanisms. Certainly, during the last decade research focused on the study and development of SIB materials, particularly cathode materials [2]. Among the all reported cathode materials layered transition metal oxides (NaxTMO2, where TM = Mn, Co, Cr, Fe etc) has been found to be appealing owing to its simple synthesis, high energy density and high capacity [3]. The structure of NaxTMO2 can be described as P2, P3 and O3 where the letters P, O represent the prismatic and octahedral Na+ coordination environment and a number indicates TMO2 layer [4]. Mn-based P3-type materials are seen as more renewable due to their ability to synthesize at lower temperatures than P2-type materials. These materials have the ability to provide high capacities but suffer from several phase transitions which leads to poor electrochemical performance. In order to enhance the cycling performance of layered cathodes, it has been demonstrated that employing doping in the structure [5]. In this work, we investigated the Cu-doping effect on Na0.62Mn1-xCuxO2 ( x=0.09, 0.19 and 0.28) material properties. The Na0.62Mn1-xCuxO2 materials are synthesized via solid-state method in the oxygen atmosphere, whose crystal structure and atomic compositions are confirmed by XRD and ICP-AAS. The HR-TEM, XPS, XANES, operando-XRD and in-situ DEMS analysis were employed to systematically examine surface morphology and structure evolution during cycling. Acknowledgment This work was supported by the grant funding of young scientists for scientific and technical projects for 2024-2026 (Ministry of Science and Higher Education of the Republic of Kazakhstan) (AP22788427) " Advancing the Frontiers: High-performance anode-free lithium-sulfur batteries". References: M.H.Han,E.Gonzalo,G.Singhand T. Rojo, Energy Environ. Sci., 2015, 8, 81–102. H. Pan, Y. S. Hu and L. Chen, Energy Environ. Sci., 2013, 6, 2338–2360. Kubota, K. Kumakura, S. Yoda, Y. Kuroki, K, Adv. Energy Mater. 2018, 8, 173415−173455. Delmas, C.; Fouassier, C.; Hagenmuller, P. Phys. B 1980, 99, 81−85. K. Wang, Prof. P. Yan, J. Fu, Prof. M. Su, Adv. Energy Mater. 2019, 31, 1904816.