Guangdong Province Key Laboratory of Display Material and Technology, State Key Laboratory of Optoelectronic Materials and Technologies, School of Electronics and Information Technology, Sun Yat-sen University, Guangzhou, China
Auto-generated profile, based on publicly available information
Xianming Li
Guangdong Province Key Laboratory of Display Material and Technology, State Key Laboratory of Optoelectronic Materials and Technologies, School of Electronics and Information Technology, Sun Yat-sen University, Guangzhou, China
Active pixel sensor (APS) outperforms passive pixel sensor (PPS) in sensitivity and frame rate, and although dominates in CMOS technology, has not yet been adopted in TFT-based flat-panel X-ray detectors (FPDs) for medical imaging due to low fill factor, leading to reduced sensitivity. In this work, a novel APS with logarithmic-exponential response based on two dual-gate TFTs is proposed and intended for high-performance large-area indirect-conversion X-ray imaging. Leveraging the in-pixel TFT amplifier, the pixelated sensor demonstrates a low off current of ~10 -12 A, a high gain of over 4×10 5 % a high responsivity of 10 5 A/W and a wide dynamic range of over 120dB at 550nm with a detection limit of 200pW/cm 2 . Such an architecture leads to a randomly-accessible 75-μm 256×256 APS array with integrating a high-resolution medical-grade gadolinium oxysulfide (GOS) scintillator for low-dose indirect-conversion X-ray imaging, requiring high resolution, wide dynamic range, and high frame rate for low-dose mammographic imaging.
Active Pixel Sensors (APS) outperform Passive Pixel Sensors (PPS) in both sensitivity and frame rate, and while they have become the dominant architecture in CMOS imaging technology, their application in thin-film transistor (TFT)-based flat-panel X-ray detectors (FPDs) remains limited—primarily due to reduced fill factor, which compromises sensitivity. This work introduces a novel APS architecture tailored for soft X-ray FPDs aimed at non-destructive testing (NDT) applications. The proposed design addresses the critical demands of high sensitivity, high signal-to-noise ratio (SNR), wide dynamic range, and high frame rate, offering a promising solution for industrial imaging scenarios. Unlike conventional PPS designs, this architecture utilizes a double-gate TFT operating in the subthreshold region to simultaneously compress and amplify optical signals. This approach significantly enhances both the detection limit and sensing range, achieving a sensitivity exceeding 102 A/W and a gain over 105% at a wavelength of 560 nm. The system demonstrates a wide dynamic range of 120 dB and a maximum photo-to-dark current ratio (PDCR) of 5.7×105. The array features random-access capabilities, achieving a frame rate of 88 frames per second, positioning it as a strong candidate for real-time, in-line inspection applications.