To the best of our knowledge, effective indoor positioning for the long term evolution (LTE) has not been addressed in the literature. In this paper, the uplink sounding reference signal (SRS), which contains timing and received signal strength (RSS) information, is exploited to achieve this task. Accordingly, an LTE based localization system using time-difference-of-arrival (TDOA) and fingerprint of RSS that operates in two steps is devised to meet the requirement of high-precision indoor positioning. In the first step, peak value detection is applied to the SRSs from spatially separated sensors to estimate the TDOAs, from which a coarse target location is computed with the use of least squares. Based on deep neural network, fingerprinting in a subarea containing the coarse solution is then performed to obtain the final position estimate. Due to the instability in the RSS values caused by non-line-of-sight and multipath propagation, we propose a novel extraction method to select reliable RSSs as input to the network. Experimental results show that our two-step localization system can provide an accuracy of sub-meter level.
21 September 2021 in IEEE Internet of Things Journal
Positioning based on received signal strength (RSS) is regarded as a promising candidate for localization purposes in wireless networks due to its feasibility and deployability. In general, multilateration and fingerprinting algorithms are the primary localization methods in RSS-based localization systems, which are assessed by the Cramér–Rao lower bound (CRLB), given fixed node locations, including the target and participating anchors. However, this methodology produces only definite values for the CRLB specific to the scenario of interest while does not provide insights into the fundamental limits of localization performance. Thus, we are motivated to analyze the RSS-based localization performance using stochastic geometry to allow for randomly distributed nodes and investigate how the nodes’ locations influence this performance. To characterize the localization performance of the multilateration method, a tractable expression of localizability is provided to indicate the probability that a target is localizable. Then, conditioned on the number of participating anchors $L$ , we provide an accurate approximation of the CRLB using the $\lceil L/4 \rceil $ th value of ordered distances to quantify the localization accuracy on a random network setting and examine how its performance is influenced under different propagation channels by utilizing $\kappa $ – $\mu $ shadowed fading. Next, the fingerprinting localization problem is regarded as a hypothesis testing problem, and thus, its performance can be evaluated based on the similarity analysis of the observed RSS fingerprints. A comprehensive analysis of these two methods is performed, and the derived calculations are compared with the experimental results to demonstrate that our unified framework can precisely reflect localization performance in real-world scenarios. Based on the analysis, we can develop an insight to optimally design an RSS-based localization system that achieves the specified localization requirements.
27 February 2024 in IEEE Transactions on Aerospace and Electronic Systems
Elliptic localization (EL) based on time-sum-of-arrival (TSOA) measurements has become popular due to its widespread applications in wireless sensor networks (WSNs) and distributed radar systems. While the performance limit of EL characterized by the Cramér-Rao lower bound (CRLB) has been thoroughly studied in the literature when the sensor (transmitter and receiver (Rx)) positions are modeled as fixed deterministic quantities, the bound in the random network scenario has not been studied. This paper introduces a methodology to investigate the TSOA-based localization performance, for the scenario where the sensors are randomly placed having their positions modeled by random parameters with their probability density functions specified. A tractable expression of the metric that approximates the CRLB and its distribution is analytically derived to characterize the fundamental limits of TSOA-based localization, which can be applied to both conventional WSNs and the special case in which the Rxs form a uniform linear array. Simulation results validate the theoretical development and demonstrate how the performance of EL is affected by the randomness of the sensor positions and different network parameters.
17 September 2025 in IEEE Transactions on Wireless Communications
Received signal strength (RSS) has been extensively studied for localization purposes, and the distributed nature of cell-free massive multiple-input multiple-output (CF-mMIMO) systems offers a new synergistic avenue for achieving high-precision localization. In this work, Open RAN and software-defined radio are used to realize the central and distributed units of a CF-mMIMO system to acquire the RSS measurements. By analyzing the experimental data, it is revealed that the RSS measured from the first-order reflection path can yield a sufficiently high signal-to-noise ratio for localization, enabling localization even without line-of-sight (LoS) paths. Inspired by this finding, a hybrid localization scheme, that can attain the best accuracy benchmarked by Cramér-Rao lower bound, is proposed to estimate the target position using both LoS and first-order non-line-of-sight RSS measurements. Furthermore, a theoretical framework is established to assess the fundamental limits of RSS-based localization in CF-mMIMO systems, offering a principled guideline for system designers to deploy and design localization systems in real-world scenarios.
Millimeter-Wave (mmWave) communication is a promising solution for achieving high data rate and low latency in 5G wireless networks. Since directional beamforming and antenna arrays are exploited in the mmWave networks, accurate angle-of-arrival (AOA) measurements can be obtained and utilized for localization purposes. In this work, we consider the AOA-based positioning for the mmWave networks using stochastic geometry and analyze how the Cramér-Rao lower bound (CRLB) is affected by the spatial distribution of nodes, including the target and participating anchors. In order to apply the CRLB on a network setting with random node locations, we propose an accurate approximation of the CRLB using the $\lceil L/4 \rceil $ -th value of the ordered distances where $L$ is the number of participating anchors. These findings provide us deep insight into optimum network design that meets specified localization requirements.
21 March 2024 in IEEE Transactions on Aerospace and Electronic Systems
The received signal strength (RSS) measurement is widely adopted in wireless positioning due to its simplicity and accessibility. This paper utilizes the Boolean Line Model (BLM) to characterize the RSS distribution considering both line-of-sight (LOS) and non-line-of-sight (NLOS) conditions, where the reflectors are modeled as line segments with random lengths and inclination angles. We begin by calculating the probability of establishing a specular reflection link for a single reflector with a given transmitter-receiver pair. By leveraging this probability, we compute the distribution of RSS for a single NLOS link. By convolving the RSS distributions from the LOS and multiple NLOS paths, the RSS distribution in mixed LOS and NLOS conditions is derived. Theoretical developments are validated by comparing simulations and the experimental data collected from real-world scenarios.