9 July 2018 in Chemical Communications
Stable cycling of a 4 V-class potassium-ion battery is demonstrated with a highly concentrated potassium bis(fluorosulfonyl)amide 1,2-dimethoxyethane solution as an electrolyte. Not only graphite and K2Mn[Fe(CN)6] half cells but also graphite//K2Mn[Fe(CN)6] full cells filled with the electrolyte exhibit higher coulombic efficiency and better cyclability than those of KPF6/carbonate ester solutions.
9 November 2023 in Advanced Energy Materials
Hard carbon (HC) is a promising negative‐electrode material for Na‐ion batteries. HC electrochemically stores Na+ ions, resulting in a non‐stoichiometric chemical composition depending on their nanoscale structure, including the carbon framework, and interstitial pores. Therefore, optimizing these structures for Na storage by altering the synthesis conditions can enhance the capacity of Na‐ion batteries. In this study, HCs using MgO, ZnO, and CaCO3 as nanopore templates are systematically investigated, and the ZnO template is found to be particularly effective. By optimizing the concentration of ZnO embedded in the carbon matrix, utilizing a blend of zinc gluconate, and zinc acetate as starting materials, the optimal ZnO‐template HC demonstrates a reversible capacity of 464 mAh g−1 (corresponding to NaC4.8) with high initial coulombic efficiency of 91.7% and low average potential of 0.18 V versus Na+/Na. Thus, a Na‐ion battery full cell consisting of Na5/6Ni1/3Fe1/6Mn1/6Ti1/3O2 and the optimized ZnO‐template HC demonstrates a remarkable energy density of 312 Wh kg−1, comparable to that of a Li‐ion battery with LiFePO4 and graphite. Moreover, the ZnO‐template HC in a K half‐cell also displays a significant capacity of 381 mAh g−1, that is, KC5.8 where the alkali content is higher than stage‐1 graphite intercalation compounds, LiC6 and KC8.
18 May 2022 in Chemical Science
The importance of the active material structure and the interface/interphase between the electrode and electrolyte in enhancing the electrochemical performance of sodium and potassium ion batteries.
26 December 2020 in ChemSusChem
1 October 2023 in Journal of Physics: Energy
New materials for electrochemical energy storage and conversion are the key to the electrification and sustainable development of our modern societies. Molecular modelling based on the principles of quantum mechanics and statistical mechanics as well as empowered by machine learning techniques can help us to understand, control and design electrochemical energy materials at atomistic precision. Therefore, this roadmap, which is a collection of authoritative opinions, serves as a gateway for both the experts and the beginners to have a quick overview of the current status and corresponding challenges in molecular modelling of electrochemical energy materials for batteries, supercapacitors, CO2reduction reaction, and fuel cell applications.
5 November 2020 in Journal of Materials Chemistry A
Highly concentrated electrolytes of KN(SO 2 F) 2 (KFSA)/diglyme and KFSA/triglyme are developed for high-voltage K-ion batteries.