28 June 2016 in Optics Letters
We report on phase interrogation of extrinsic Fabry–Perot interferometric (EFPI) sensors through a wavelength-switched unit with a polarization-maintaining fiber Bragg grating (PMFBG). The measurements at two wavelengths are first achieved in one total-optical path. The reflected peaks of the PMFBG with two natural wavelengths are in mutually perpendicular polarization detection, and they are switched through an electro-optic modulator at a high switching speed of 10 kHz. An ellipse fitting differential cross multiplication (EF-DCM) algorithm is proposed for interrogating the variation of the gap length of the EFPI sensors. The phase demodulation system has been demonstrated to recover a minimum phase of at the test frequency of 100 Hz with a stable intensity fluctuation level of . Three EFPI sensors with different cavity lengths are tested at the test frequency of 200 Hz, and the results indicate that the system can achieve the demodulation of EFPI sensors with different cavity lengths stably.
21 December 2017 in IOP Conference Series: Materials Science and Engineering
In this paper, a MEMS-based extrinsic Farby-Perot Interferometric (EFPI) acoustic pressure acoustic sensor is presented. The diaphragm structure is used as the second reflected surface, and the sensitive surface to acoustic pressure. A wavelength-switched phase demodulation system for EFPI sensors is used for acoustic signal recovery. The modified phase demodulation system has been demonstrated to recover the signal to a stable intensity fluctuation level of ±0.5 dB at the test frequency of 2000 Hz. In the test depth of 50cm, the sensor has a resonant frequency of 3.7 kHz, a flat frequency range of 10-800Hz, and a corresponding acoustic pressure sensitivity of -159 dB re. 1/μPa.
27 June 2022 in IEEE Photonics Journal
Cavity optomechanics in the photonic devices enables a light-matter interaction in the chip-scale systems via the optical force driven mechanical motion. In this paper, a pump-probe scheme consisting of dual optomechanical cavities is proposed for the first time, where one optical cavity driven by a high input power act as a pump channel and the other one is used as a probe channel to detect the dynamical motion of mechanical resonator. Moreover, modulation of the optical force in the pump channel is achieved to observe the amplification of mechanical motions. As the light input of the pump channel increases, the dynamical displacement of the mechanical resonator is theoretically actuated to 4.8 nm $/\!\sqrt {\text{Hz}} $ at the pump power of 0.75 mW. This all-optical amplification of mechanical motion based on the pump-probe scheme potentially paves the way for the development of optomechanical actuation and switch for the photonic integrated circuits.