By simply doping with a certain amount of Sm3+, opaque lead-free (K0.5Na0.5)NbO3 piezoelectric ceramics were fabricated into transparent/translucent ceramics. The photochromic (PC) behavior and associated reversible transmittance/luminescence modulation were realized via physical means. Upon illumination under a xenon lamp, the maximal decreased values of optical transmittance and luminescence intensity are 36.1% and 49%, respectively. Meanwhile, the colors of all the ceramics turn darker after illumination, and subsequently return to their initial states by thermal stimulus (200 °C for 5 minutes), exhibiting a typical PC phenomenon. Combining experimental and calculation results, it can be found that the PC mechanism is closely related to the vacancy defects induced by both high-temperature sintering and Sm3+-doping. Additionally, the Sm3+ effects on phase structures, microstructures, optical transmittance and photoluminescence properties of the ceramics were systematically studied. The substitution behavior of Sm3+ and vacancy defect concentrations on the energy band gap of the material were unraveled by the first principles calculations to further clarify the corresponding mechanism. The Sm3+-doped (K0.5Na0.5)NbO3 transparent ceramics have potential for application in modulation and conversion of photoenergy, such as in optical memory and photo-switching devices. And the reversible tuning of transmittance in our material is especially attractive for exploring novel transparent PC materials.
3 January 2020 in Journal of Materials Chemistry C
A novel photochromic (PC) ferroelectric material, Nd3+-doped K0.5Na0.5NbO3 translucent ceramic, was fabricated by a conventional solid method. The ceramic shows moderate optical transparency due to its dense microstructure, as well as good photoluminescence (PL) properties of up-conversion (UC) emission in the visible region and down-shifting (DS) emission in the near-infrared region. Simultaneously, the colors of all the ceramics turn darker after 365 nm illumination, and then recover to their initial states upon thermal stimulus (210 °C, 10 min), exhibiting a typical PC phenomenon. In particular, the effect of the PC behavior on PL lifetimes of Nd3+ was investigated. Multi-mode reversible modulations of various optical behaviors were realized based on the PC behavior, especially for the regulation of near-infrared emission. And the maximum modulation ratios of transmittances, UC or DS PL intensities and luminescence lifetimes are 43.0%, 66.7%, 66.4% and 12.8%, respectively. Owing to high-temperature sintering and Nd3+ substitution in the ceramics, cation and oxygen vacancies appear to produce F′ and V1 color centers, which are in charge of the PC behavior and corresponding modulations. These results suggest that the ceramics are a promising PC material in visible and near-infrared optical data storage, photo-switches, and optoelectronic devices. Meanwhile, they also provide insights into the applications of rare-earth Nd3+ in other inorganic PC ferroelectric materials.
Vitrimers, as intriguing polymers, possess exchangeable links in the crosslinking networks, endowing them with the abilities of recycling and reprocessing. However, most of vitrimers are generally fabricated via complex synthesis and polymerization processes. Toxic and unstable exogenous catalysts are inevitably applied to activate the exchange reaction to rearrange the crosslinking networks. These drawbacks limit the widespread applications of vitrimers. Moreover, most reported vitrimers could only partially maintain or severely deteriorate their mechanical properties after recycling. Herein, to solve the above-mentioned problems, for the first time, a catalyst-free and recycle-reinforcing elastomer vitrimer is revealed. By the reactive blending of commercially available epoxidized natural rubber and carboxylated nitrile rubber, the elastomer vitrimer associated with exchangeable β-hydroxyl ester bonds was obtained. Strikingly, the vitrimer exhibits an exceptional recycle-reinforcing property. This work provides a feasible method to fabricate elastomer vitrimers, which promotes the recycling of crosslinking commercial available elastomers.