5 December 2006 in Physical Review E
Thin films deposited on substrates are usually submitted to large residual compression stresses, causing delamination and buckling of the film into various patterns. The present study is focused on the different equilibria arising on strip-shaped delaminated areas. The three most common types of buckling patterns observed on such strips are known as the straight-sided wrinkles, bubble pattern, and telephone cord blisters. The stability of those equilibria as a function of the two stress components of the loading is investigated. The Föppl–Von Karman model for elastic plates is used for theoretical aspects. The post-critical equilibrium paths of the buckling patterns are investigated numerically by means of the finite-element method. The substrate is assumed to be rigid and the contact to be frictionless. The equilibrium solutions can be classified into families of homologous equilibria allowing the identification of dimensionless parameters for the study of stability. A mapping of the different stable post-critical equilibria is given. It is shown that the straight-sided wrinkles and the bubbles are associated with anisotropy of stresses and/or of elastic properties, whereas the telephone cords are stable at high isotropic stresses. The morphological transitions are experimentally evidenced by in situ atomic force microscopy observations of a nickel -thick film under stress.
1 March 2019 in Scripta Materialia
1 July 2020 in Scripta Materialia
15 April 2000 in The European Physical Journal Applied Physics
In situ atomic force microscopy observations have been carried out of thin films under external compressive stress. Straight-sided buckling patterns arise perpendicular to the compression axis which tend to attract one another during propagation a few hundred nanometers apart. The mechanisms whereby these debonding patterns interact have been investigated taking into account the elastic energy of both the film and the substrate. The equilibrium distance between two straight-sided wrinkles has been determined; good agreement has been obtained between the experimental results and the mechanics involved.
1 July 2010 in Thin Solid Films
9 February 2004 in Applied Physics Letters
Residual stresses in materials and components such as thin films in microelectromechanical systems are developed during the production process and may drastically limit their functionality and lifetime; their minimization is thus of utmost technical importance. Ion beamirradiation in polycrystallineMothin films sputter-deposited on (100) silicon wafer at room temperature has been used to reduce the residual stresses present in the layer and thus to improve the mechanical stability of the film/substrate set. Although a strong reduction of residual stresses in the whole film is evidenced, irradiation affects the film-substrate bond strength; defect creation at the film-substrate interface due to ion implantation induces thin-film delamination.