17 August 2017 in IEEE Transactions on Industrial Electronics
A dual-drive H-gantry is commonly used in many industrial processes to meet the requirement of high-precision Cartesian motion. Unlike the rigid-linked gantry stage, the flexure-linked counterpart allows a small degree of rotation of the crossarm to prevent possible damages. However, by this design, the chattering of control signals and inappropriate stiffness of the flexure may induce the resonant modes of the gantry. Hence, to maintain the precision tracking of the midpoint position and the orientation of the gantry, as well as to minimize the vibration on the end effector, we seek the most suitable flexure stiffness and controller parameters by formulating a constrained linear-quadratic optimization problem. Since such a mechatronic design problem is not solvable via standard linear-quadratic regulator formulas, we convert it to a constrained projection gradient-based optimization problem, which can be efficiently solved by direct computation of projection gradient and line search of optimal step length. A fast convergence of parameters is achieved after first several iterations. Through a series of comparative experiments, the effectiveness of the proposed method is validated.
20 September 2018 in IEEE Transactions on Industrial Electronics
In this work, the design of a novel the flexure-linked dual-drive H-gantry is firstly introduced. Compared to conventional stacked X-Y tables, the advantages of this gantry are on decoupled X-Y actuation, better mechanical reliability, larger driving force, and shorter response time. However, after deriving its reduced-order dynamical model, it is found that the precision of the end effector is significantly affected by the position dependent torque caused by the inter-parallel-axes driving forces on the fixed inertia frame and coupling forces from the pair of flexures. These form barriers that limit precision positioning and tracking performance over a large workspace. Thus, in the following part, a robust integral of the sign of the error (RISE) control with novel jerk adaptation is proposed on top of the standard PID and feedforward scheme. Compared with some prior RISE schemes with gain adaptation, the proposed scheme yields bounded robust gain in the presence of noisy velocity estimation. Real-time experiments on the actual test-bed indicate that both improvement of motion precision and prevention of resonant mode excitation over a large workspace are successfully achieved in the proposed scheme.