9 November 2022 in Physical Review Materials
We report the dielectric properties of a two-dimensional layered Ruddlesden-Popper halide perovskite synthesized via a simple mechanochemical process to explore fundamental aspects of ionic conduction and relaxation mechanism over a wide temperature and frequency range. Several experimental techniques, such as complex impedance spectroscopy, alternating current (AC) conductivity spectroscopy, and complex electric modulus spectroscopy, have been employed to investigate the nuances of ionic conduction and relaxation mechanisms, and the results have been corroborated using different theoretical models, such as the Maxwell-Wagner equivalent circuit model, the modified Jonscher power law, the Havrilliak-Negami (HN), and the Kohlrausch-Williams-Watts (KWW) model. The contribution of the grains and grain boundaries to the total impedance in the system is estimated by the analysis of the Nyquist plots. In temperature-dependent AC conductivity spectra, a critical temperature (413 K) is observed, beyond which the conductivity increases abruptly. This critical temperature also defines two distinct temperature ranges: the low-temperature (303–413 K) and the high-temperature (423–463 K) regimes, where the ionic transport mechanism switches from the normal ionic transport to a vacancy-mediated ionic transport mechanism. A substantially high activation energy is calculated from the Arrhenius plot of the ionic conductivity in the high-temperature region, while at the low-temperature region, the activation energy is found to be . The abrupt jump in the ionic conductivity beyond the critical temperature is attributed to the onset of the anionic vacancy-mediated enhanced ionic conductivity. Polaronic models have been used to interpret the AC conductivity and its power-law exponent. The activation energy obtained from ionic conductivity measurements is consistent with those calculated from relaxation time using the HN and KWW models. The presence of two master curves in time-temperature superposition scaling of AC conductivity and modulus loss spectra specifies the validity of two different conduction mechanisms.
12 September 2023 in Physical Review Applied
Chiral halide perovskites are being extensively studied due to their promising spintronic and optoelectronic properties, where the organic chiral ligands introduce chirality into halide perovskites. Right-handed and left-handed chiral materials are mirror images of one another and break the inversion symmetry, which produces ferroelectricity. In this work, we study the dielectric, piezoelectric, and ferroelectric properties of (R)-(−)-1-cyclohexylethylammonium) (R-CYHEA), a chiral, one-dimensional perovskite. We performed and analyzed complex impedance spectroscopy; ac conductivity; and the complex electric modulus using the Maxwell-Wagner equivalent circuit model, the universal power law, the Havrilliak-Negami (HN) model, and the Kohlrausch-Williams-Watts (KWW) model to understand the transport and relaxation mechanism in the chiral R-CYHEA perovskite over wide temperature (313–473 K) and frequency (4 Hz–8 MHz) ranges. The dc conductivity is almost constant in the paraelectric-to-ferroelectric phase-transition region (PTR) but increases below and above this region. The activation energy of this region is very low, about 0.09 eV, while below the PTR, the activation energy is about 0.85 eV, and above the PTR, it is about 0.90 eV. We further note that the conduction mechanism changes from overlapped large polaron tunneling to correlated barrier hopping due to the ferroelectric-to-paraelectric phase transition. The activation energy derived from the relaxation time (using HN and KWW models) agrees with that obtained from the dc conductivity. In addition, we measured the saturation polarization of 0.01 µC/ at a 4-kV/cm applied electric field and a piezoelectric constant () of about 36 pm/V at the maximum applied bias voltage of 10 V. Finally, we fabricated a polyvinylidene fluoride and 3-wt % R-CYHEA chiral perovskite composite film for the development of high-performance energy-harvesting nanogenerators.
15 November 2023 in Physical Review Applied
We have explored different aspects of charge-carrier dynamics and relaxation in lead-free double perovskite using dielectric spectroscopy and assessed its electrochemical response. The cubic phase with a lattice constant of 11.644 Å is confirmed for synthesized perovskite. The phonon dispersion illustrated by density-functional theory indicates the existence of soft optical modes triggered by anharmonic rattling of atoms and dynamical rotation of octahedra. Complex impedance spectra have provided details of the contributions of grain boundaries, grains, and anharmonic rattling to charge-carrier dynamics. The exhibits electrical conductivity of at ambient conditions. The values of the power-law exponent for all temperatures suggest superlinear power-law (SPL) behavior of the ac conductivity. The relaxation time and the stretched exponent in the Kohlrausch-Williams-Watts (KWW) function of the electric modulus are caused by charge-carrier short-range mobility and the hopping of rattling-assisted polarons. The supercapacitor fabricated with as the electrode has delivered a specific capacitance of 3830 F at a current density of 2 A . A quasi-solid-state asymmetric supercapacitor device was also fabricated, which delivered an energy density of 51 Wh and a power density as high as 852 W at a current density of 1 A . We believe this work will open up the avenue to another generation of lead-free, perovskite-based, sustainable energy-storage systems.
1 August 2020 in APL Materials
We studied the magnetic properties of self-assembled aggregates of BiFeO3 nanoparticles (∼20 nm–40 nm). The aggregates formed two different structures—one with limited and another with massive crosslinking—via the “drying-mediated self-assembly” process following dispersion of the nanoparticles within different organic solvents. They exhibit large coercivity HC (>1000 Oe) and exchange bias field HE (∼350–900 Oe) in comparison to what is observed in isolated nanoparticles (HC ∼ 250 Oe; HE ∼ 0). HE turns out to be switching from negative to positive depending on the structure of the aggregates, with ∣+HE∣ being larger. Magnetic force microscopy reveals the magnetic domains (extending across 7–10 nanoparticles) as well as the domain switching characteristics and corroborates the results of magnetic measurements. Numerical simulation of the “drying-mediated self-assembly” process shows that the nanoparticle–solvent interaction plays an important role in forming the “nanoparticle aggregate structures” observed experimentally. Numerical simulation of the magnetic hysteresis loops, on the other hand, points out the importance of spin pinning at the surface of nanoparticles as a result of surface functionalization of the particles in different suspension media. Depending on the concentration of pinned spins at the surface pointing preferably along the easy-axis direction—from greater than 50% to less than 50%—HE switches from negative to positive. Quite aside from the bulk sample and isolated nanoparticle, nanoparticle aggregates—resulting from surface functionalization—therefore offer remarkable tunability of properties depending on structures.
1 August 2021 in Materials Letters