An automotive cooling module working at three different operating conditions is investigated using a microphone array method. Experiments on an open rotor and on a full module configurations were conducted in the ALCOVES anechoic chamber of the von Karman Institute for Fluid Dynamics, Belgium. The acoustic data are post-processed using the ROtating Source Identifier algorithm. As first step, the method was applied for the fan-alone configuration at the nominal operating point. The sound maps of one-third octave band are discussed with respect to the minimum resolving frequency emerging by the Rayleigh criterion. Integrated spectra of the whole beamforming maps are used to validate the method whereas acoustic characteristics of the fan are identified by evaluating integrated spectra of each blade separately. Subsequently, the ROSI method was applied to both configurations, demonstrating the acoustic transparency of the automotive heat exchanger. Depending on the adjusted mass flow rate, sound sources are located on the leading or trailing edges of the fan blades. To complement the analysis, sound directivity measurements have been carried out in the anechoic wind tunnel at the University of Sherbrooke, Canada, on an another sample of the same engine cooling module.
View Video Presentation: https://doi.org/10.2514/6.2021-2155.vid Small ducted fans in HVAC applications are often affected by their integration within the final product as the flow and operating conditions induced by the fan working environment have a significant impact on its noise emission. This paper presents an experimental investigation of such installation effects for a tangential fan subjected to distorted inflow conditions. A multi-ports eduction method is used to this end, having demonstrated its capacity to remove test rig scattering that would otherwise contaminate the results. The inflow and turbulence ingested by the fan have been measured using a hot-wire anemometer actuated module. Their influence on the scattering and the fan sound emission led to an analysis of the most influential inflow parameters regarding noise production.