Key Laboratory of Industrial Computer Control Engineering of Hebei Province and the State Key Laboratory of Crane Technology, Yanshan University, Qinhuangdao, China
Auto-generated profile, based on publicly available information
Wenbo Wang
Key Laboratory of Industrial Computer Control Engineering of Hebei Province and the State Key Laboratory of Crane Technology, Yanshan University, Qinhuangdao, China
This brief presents a novel low-complexity error-surface prescribed performance control (ESPPC) for the single-rod electro-hydraulic system (EHS) subject to uncertain parameters and unknown nonlinearities. Different from existing results, the servo valve spool characteristic is considered to be nonlinear rather than linear. To solve the uncertain nonlinearities in the EHS, we propose a new control design approach by utilizing the error surface, the unknown dynamic estimator (UDE), and the prescribed performance methodology, which achieves prescribed transient and steady-state performance for the tracking error while avoiding the use of the backstepping scheme and the approximators [e.g., fuzzy systems (FSs) and neural networks (NNs)]. Moreover, to prevent the propagation of peak phenomenon induced by the UDE to the controlled system, the developed controller is appropriately saturated without impacting the prescribed performance properties of the tracking error. The stability of the EHS has been rigorously proved. Finally, extensive experimental results are offered based on a physical EHS to demonstrate the validity of the proposed approach.
Power system control is commonly based on linear controllers, where linear controllers are designed using a linearized model of the system at a specific operating point. However, when the system’s operating point is changed, the dynamic characteristics of the system shift significantly. At this point, linear controllers often fail to meet system stability requirements. Furthermore, the range of state variables in the power system is limited by the objective conditions. In addition, the power system has high-precision constraints on the deviation of the load frequency and so on. Therefore, it is worth designing a finite-time controller that satisfies the prescribed performance and full-state constraints based on the nonlinear model of the power systems. Firstly, the prescribed performance is incorporated into the barrier Lyapunov function to ensure that the tracking error is within the desired accuracy. Then, the tracking strategy is designed based on backstepping and incorporating a first-order filter to ensure that the controlled system’s signals and tracking errors remain bounded in finite time. Finally, two simulations are given to illustrate the effectiveness of the proposed control scheme, confirming that all states keep within the predefined range.
This article investigates a novel low-complexity finite-time quantized control method for a networked electro-hydraulic system (EHS). First, to address parameter uncertainties, unknown nonlinearities, and disturbances, a structurally and computationally simple state feedback controller is developed for the EHS by using a finite-time prescribed performance function. Subsequently, to save the communication bandwidth of the networked EHS, an input quantizer with a hysteresis property is structured to reduce the transmission frequency of the control signal. In addition, the strict theoretical derivation demonstrates that the quantized control signal ensures that the tracking error of the EHS converges to a prescribed range within a preset finite time. The stability of the closed-loop system is rigorously proved. Finally, the simulations and experiments based on a real experimental bench show that the proposed method achieves satisfactory tracking performance while saving network communication resources.