1 February 2014 in Electrochimica Acta
The behaviour of magnesium electrodes has been investigated in 3.5% NaCl during free corrosion and potentiodynamic polarizations. The usual electrochemical measurements were complemented with real-time direct measurement of the amount of hydrogen evolved and real-time optical imaging of the electrode surface. It was found that the anodic reaction of magnesium oxidation results in the generation of dark regions on the surface of the electrode and such regions are efficient in supporting the cathodic reaction (hydrogen evolution). Further, compared to the behaviour observed at the free corrosion potential, the dark regions propagated significantly faster during anodic potentiodynamic polarization and did not propagate significantly during cathodic potentiodynamic polarization. The findings indicate that the negative difference effect is due to an increase in cathodic current during anodic polarization resulting from the modification of the electrode surface after the anodic reaction has occurred. Additionally, the real-time measurement of the amount of hydrogen evolved enabled a direct estimation of the corrosion current. Thus, the actual value of the corrosion current could be compared to the values of corrosion current estimated by potentiodynamic polarization. It was found that anodic polarization provides little information on the corrosion rate, whereas cathodic polarization provides a more accurate estimation. Finally, it is suggested that the corrosion rate on magnesium is controlled by the rate of the cathodic reaction. Such reaction is self-limiting on magnesium since it produces alkalinity and alkalinity promotes passivity
1 June 2015 in Electrochimica Acta
1 July 2009 in Electrochimica Acta
1 July 2012 in Electrochimica Acta
1 July 2010 in Corrosion Science
1 January 2009 in Journal of the Electrochemical Society
Tartaric acid is added to sulfuric acid anodizing baths to generate porous anodic film that provides corrosion resistance to practical aerospace alloys and reduces the environmental impact of the traditional chromic acid anodizing process. Here, a fundamental study on the effects of the addition of tartaric acid to the sulfuric acid anodizing electrolyte has been undertaken. During anodizing, it was evident that tartaric acid does not significantly affect the mechanism of porous film growth, but it reduces the growth rate of the porous anodic film. After anodizing, in acidic environments, it may reduce the dissolution rate of a previously formed oxide. Furthermore, it was found that in a nearly neutral, chloride-rich environment, tartaric acid limits the anodic reaction of aluminum dissolution at concentrations in the hundreds of ppm range. The previous suggests that the good anticorrosion performance of alloys anodized in the presence of tartaric acid is due to residues of tartaric acid in the pore solution.