6 September 2022 in Semiconductor Science and Technology
This paper presents a 50 dB high-gain operational amplifier (OPAMP), which is fabricated by unipolar n-type indium–zinc–oxide thin-film transistors. Different positive feedback technologies are employed to achieve sufficient voltage gain. The fabricated OPAMP exhibits an open-loop voltage gain (A v) of 50 dB over a −3 dB bandwidth of 15 kHz at the supply voltage of 20 V. The measured unity-gain frequency (f UG) and the DC power consumption are 500 kHz and 8.07 mW, respectively. In addition, an effective frequency compensation scheme is also introduced and simulated. The simulation results that the proposed OPAMP has a voltage gain of 50 dB with 60° phase margin at 150 kHz unity-gain frequency after compensation.
18 April 2024 in Flexible and Printed Electronics
This paper presents a flexible fully integrated 4-bit successive approximation register (SAR) analog-to-digital converter (ADC), which is fabricated by unipolar n-type indium-zinc-oxide thin-film transistors. A bootstrap switch and a comparator with a pre-amplifier are proposed and employed to realize the SAR ADC. The fabricated SAR ADC achieves a sampling rate of up to 20 kHz and a peak signal-to-noise and distortion ratio of 22.9 dB, corresponding to an effective-number-of-bits of 3.52 bits. The static performance of −0.58/+0.37 LSB DNL and −0.49/+0.39 LSB INL is achieved.