In this work, the symmetrical solid oxide electrolysis cell (SOEC) with the configuration of La0.6Sr0.4Fe0.8Ni0.2O3-δ (LSFN)-GDC/GDC/YSZ/GDC/LSFN-GDC is evaluated with electrochemical performance for direct electrolysis of pure CO2. The results find that the current density increases from 1.03 A/cm2 at 800°C to 1.52 A/cm2 at 850°C under an electrolysis voltage of 2.0 V and the polarization resistance (Rp) is as low as 0.12 Ω·cm2 at 800°C. The formation rates of CO can reach 5.16 and 6.35 mL/min·cm2 at the voltages of 1.8 and 2.0 V at 800°C, respectively. Furthermore, the cell also displays good stability in the short-term CO2 electrolysis test. The research confirms that this novel LSFN is a potential electrode material in symmetrical solid oxide electrolysis cell for pure CO2 electrolysis.
With the rapid development of novel energy conversion and storage technologies, there is a growing demand for enhanced performance in a wide range of electrocatalysts. Perovskite oxides (ABO3) have caused widespread concerns due to their excellent electrocatalytic properties, low cost, stable and reliable performance. In recent years, the research on anion O‐site doping of perovskite oxides has been a cynosure, which is considered as a promising route for enhancing performance. However, a systematic review summarizing the research progress of anion‐doped perovskite oxides is still lacking. Therefore, this review mainly introduces the elements and strategies of various common anions doped at O‐site of perovskite oxides, analyzes their influence on the physical and chemical properties of perovskites, and separately concludes their applications in electrocatalysis. This review will provide ideas and prospects for the development of subsequent anion doping strategies for high performance perovskite oxides.