We report dual ion beam sputtering fabrication of an Al/ZnO/Al memristor displaying forming-free bipolar resistive switching characteristics with memristive behavior without necessitating any post-processing steps. A nearly amorphous ZnO thin film and an appropriate concentration of oxygen vacancies play a significant role in imparting forming-free, stable, and reliable behavior to memory cells. Besides, sufficient non-lattice oxygen ions in the film play a crucial role in the resistive switching process. The AlOx interface layer is observed to strongly affect the switching mechanism in the memory device by altering the barrier at the Al/ZnO interface. The device shows stable switching behavior for >250 cycles with good retention and stable set/reset voltages.
Single synaptic device with inherent learning and memory functions is demonstrated based on a forming-free amorphous Y 2 O 3 (yttria) memristor fabricated by dual ion beam sputtering system. Synaptic functions such as nonlinear transmission characteristics, long-term plasticity, short-term plasticity and ‘learning behavior (LB)’ are achieved using a single synaptic device based on cost-effective metal-insulator-semiconductor (MIS) structure. An ‘LB’ function is demonstrated, for the first time in the literature, for a yttria based memristor, which bears a resemblance to certain memory functions of biological systems. The realization of key synaptic functions in a cost-effective MIS structure would promote much cheaper synapse for artificial neural network.
1 January 2011 in Japanese Journal of Applied Physics
Cu2ZnSnS4 (CZTS) thin films were prepared by simultaneous sputtering of metallic targets and sulfurizing a metallic precursor under elemental sulfur atmosphere in a sealed tube. Subsequently, they were applied to the fabrication of thin film solar cells. The precursors with desired compositional ratio and thickness were obtained by controlling the area ratio of sputtering targets and also sputtering parameters. We have succeeded in obtaining high-quality polycrystalline CZTS thin films by sulfurization under a sulfur vapor pressure higher than atmospheric pressure. A CZTS-based solar cell with 3.7% conversion efficiency was obtained from CZTS films sulfurized at 590 °C for 7 min.
1 January 2007 in Japanese Journal of Applied Physics
In this report, we study factors that dominate the mode transformation of resistive switching (RS) in yttria based memristive devices. It is found that amorphous yttria films are more suitable for RS whereas highly crystalline films are counterproductive for RS. The transformation from unipolar to bipolar resistive switching mode is demonstrated in our devices via moving from a system of single Schottky barrier diode (SBD) to double SBD. The conduction mechanism behind these transformation mechanisms is found to be predominantly interfacial. We also report a forming-free Al/Y 2 O 3 /Al based memristor fabricated by the dual ion beam sputtering without any post-processing steps for the first time. It shows stable switching behavior for >29 000 cycles with good retention (10 5 s) characteristics.