1 January 2021 in Naukovyi Visnyk Natsionalnoho Hirnychoho Universytetu
Purpose. To identify features of methane-air mixture flow within the steel degassing pipelines as well as within those ones made of composite materials, to develop engineering solutions improving their reliability for actual use. Methodology. To solve the problem of increasing the capacity of mine degassing pipelines, an analysis of fundamental studies on the physical and mechanical properties of mine methane and the processes of its recovery in a mine environment is conducted. Schemes of operating gas-transmission systems and peculiarities of functioning of zonal vacuum gas pipelines in the conditions of intensive removal of rocks of the bottom of underground workings and deformations of the massif are considered. Based on the results of expert assessment of production situations, potential reserves for enhancing the efficiency of in-mine gas pipelines have been determined. Reliability indicators of traditionally applied steel pipes and their analogues from composite materials used abroad are established, innovative technological and technical solutions for their construction at Ukrainian mines are recommended. Findings. According to the expert evaluation of the operation modes of mine degassing lines and analysis of the world practices to apply pipes made of composite materials for mining industry, an engineering solution concerning the improvement of operating degassing systems as well as their capacity has been substantiated. Originality. Innovative engineering solutions as for the modernization of the underground degassing systems, which allow increasing the capacity of mine pipelines, and provide maintaining of the quality the captured methane-air mixture in the process of its transportation from wells to vacuum pump stations, have been substantiated. Practical value. Implementation of the research results to decrease hydraulic resistance within the degassing mains as well as introduction of innovative engineering solutions for the construction of main degassing pipelines from long links of composite pipes with a minimum number of butt joints has been scheduled for Ukrainian mines dealing with the development of gassy coal seams.
30 August 2022 in Naukovyi Visnyk Natsionalnoho Hirnychoho Universytetu
Purpose. To develop methods for calculating of the expediency to use mine degassing system, made of the current composites, to improve safety in heavily loaded longwalls. Methodology. Solving the problems involved analysis of the current studies concerning the methane-air mixture removal from stopes while mining gaseous coal seams. Standard schemes of gas transmission systems have been considered as well as peculiarities of the methane-air mixture transportation using underground vacuum pipelines made from steel and composites. Findings. Expert evaluation concerning economic expediency to replace the traditional steel pipelines by the modern composite gas lines for the available mine degassing systems, has helped develop methods calculating the operational indices of degassing networks made from the recent polymeric materials. Originality. Methods have been developed to calculate technical and economic parameters of degassing network, made from the modern composites, and upgrade the current degassing systems to reduce expenditures connected with the captured methane-air mixture transportation from wells to vacuum pump stations. Practical value. Implementation of the findings as for the evaluation of the technical and economic parameters and introduction of the innovative engineering solutions to replace the traditional steel degassing pipelines by the recent gas lines made of long composite chains, involving minimum joints, has been scheduled by Ukrainian gaseous coal mines.
30 November 2021 in Geoengineering
The purpose of the paper is to analyze a deformation mechanism of the mine degassing pipelines to forecast their spatial changes in terms of intensification of underground mining of coal-gas seams. Methodology. The paper deals with expert assessment of the available approaches to diagnostics of technical condition of mine degassing pipelines, which are constructed within the in-seam underground mine workings with the floor rocks prone to heaving. The results of scheduled surveying measurements of technical condition of in-seam development workings have helped identify the potentially hazardous zones of rock mass deformation and indices of changes in spatial location of section degassing pipelines mounted in those mine workings. To determine the operating modes of a degassing pipeline under such operating conditions, a computer model of interaction of the elements of transport-technological system “mine gas pipeline – mine working” has been developed Findings. Diagnostics of technical conditions of the mine gas transmission lines and examination of their dismantled components have helped understand that deflections, mainly resulting in water accumulation zones, intensive corrosion of internal pipe walls, and mechanical depositions of coal and rock dust take place right within the flange connection areas. Formation of such zones is argued by health of the degassing pipeline as well as mine air inflow. Availability of internal corrosion, water accumulations, and mine air inflow decreases substantially capacity of the underground gas transmission line inclusive of qualitative characteristics of the captured methane-air mixture and efficiency of MDS on the whole. Originality. New approaches to diagnostics of technical condition of mine degassing gas pipeline in difficult mining and geological conditions of development of gas-bearing coal seams are substantiated and it is offered to consider indicators of their functioning as interacting in space and time transport-technological system "mine gas pipeline - mining". Practical implications. The operational parameters of mine degassing systems notes that the equipment performance with the least underpressure losses created by vacuum pipes requires that the degassing pipeline should have minimum hydraulic resistance of the gas transmission network. Pipeline aeration from the mine workings and water accumulations should be prevented by means of qualitative hermetic sealing of its flange connections as well as the pipeline straightness with the corresponding pitches. Consequently, the basic requirements for operating mine degassing pipelines involve their design profile, tightness of flange connections of pipes as well as operative control of the facility health.