Pd@Pd(OH) 2 core–shell nanoparticles were potentiostatically electrodeposited onto a glassy carbon electrode, GCE, from Pd(II) ions dissolved in the reline deep eutectic solvent. It is shown that the GCE/Pd@Pd(OH) 2 -modified electrode displays a high catalytic activity towards the methanol electrochemical oxidation reaction (MOR) in alkaline solution, revealing a mass activity of (2370 ± 450) mA mg Pd−1 at the peak potential (for CVs recorded at 0.1 V s −1 ), much greater than those reported to date for other nanoparticles, namely: Pd, Cu 1 Pd 2 , Pd 4 Ag 1 , PdFe, PtPdPt, Pt or Pt 2 Ru 1 , synthesized by means of technically complicated, expensive and time-consuming methods or electrodeposited from aqueous media. In particular, the steady-state current reported for PdNPs electrodeposited from aqueous media towards MOR depicted values around 3 mA mg Pd−1 , while those from DES (this work) reached values around 42 mA mg Pd−1 . Furthermore, it is shown that the Pd@Pd(OH) 2 nanoparticles displayed excellent poisoning tolerances, from 2 to 8, depending on the applied potential scan rate and anodic switching potential, which remains practically constant after 200 voltammetric cycles.
1 October 2022 in Journal of the Electrochemical Society
The present work deals with the nucleation and growth process of metallic cobalt clusters onto glassy carbon, and the development of an environmentally friendly recycling process for the recovery of cobalt as a value-added product from spent lithium-ion batteries (LiBs), using a deep eutectic solvent, DES, formed by choline chloride and urea, termed reline. It was shown that reline works as leaching medium to extract Co(II) from cathode powders of dismantled spent batteries, thereby obtaining, after doing the electrodeposition process using the same reline as operating bath, a solid Co metal phase onto a glassy carbon electrode. Finally, supplementary relevant characterization of the deposits formed was carried out by means of scanning electron microscopy, energy-dispersive X-ray spectroscopy and X-rays photoelectrons spectroscopy, XPS.
1 September 2022 in Journal of the Electrochemical Society
Electrochemical formation of Pd-Co alloy nanoparticles, PdCoNPs, onto a glassy carbon electrode, GCE, from their metallic precursors dissolved in the reline deep eutectic solvent, is reported for the first time. Potentiodynamic and potentiostatic studies indicated that PdCoNPs were electrodeposited by multiple nucleation of 3D bimetallic centers with mass transferred-controlled growth. Potentiostatic current density transients, j – t , were adequately fitted by a theoretical model that describes the kinetics of nucleation and diffusion-controlled growth of bimetallic phases and the number density of active sites for PdCoNPs nucleation, N0 , and their nucleation frequency, A , was determined as a function of the applied potential. SEM image recorded on the GCE electrodeposited with PdCoNPs showed that sizes and particle number density of these PdCoNPs depend on both the applied potential and the deposition time considered. At −0.42 V and 10 s the PdCoNPs had (30 ± 4) nm as average size and a particle number density of (4.23 ± 0.33) x10 10 PdCoNPs cm –2 . EDS, XRD and XPS observations indicated the presence of Pd and Co. forming a PdCo alloy as zero and bivalenced oxidation states. GCE/PdCoNPs depict higher mass activity towards FAOR than GCE/PdNPs and other modified electrodes reported in the literature where the electrocatalysts were synthesized by different means.
1 September 2025 in Journal of the Electrochemical Society
This study explores the electrodeposition of cadmium (Cd) onto a glassy carbon electrode (GCE) using ethaline, a deep eutectic solvent composed of choline chloride and ethylene glycol, as the electrolyte. The mechanism and kinetics of Cd deposition were investigated at 35 °C through cyclic voltammetry and potentiostatic techniques. From voltammetric analysis, the exchange current density ((7.4 ± 0.1) μA cm−2) were determined for the Cd(II)/Cd(0) redox couple. Analysis of current transients showed that deposition followed a multiple three-dimensional (3D) nucleation mechanism with diffusion-controlled growth, modeled using Scharifker and Mostany’s approach. Kinetic parameters such as nucleation frequency (A), number density of active sites (N₀), and diffusion coefficient (D = (4.86 ± 0.10) × 10⁻7 cm2·s⁻1) were evaluated. The overpotential dependence of A enabled estimation of a surface energy ((6.26 ± 0.02) × 10⁻6 J cm−2), nucleation work (400 J mol⁻1), and critical nucleus size (<1 atom). Scanning electron microscopy, energy-dispersive spectroscopy, and X-ray photoelectron microscopy analyses revealed a uniform Cd distribution, with quasi-spherical and irregular structures interconnected by nanowires. Cd existed as both metallic and oxidized forms. Additionally, UV–Vis spectroscopy and Kubelka–Munk analysis yielded an optical band gap of 2.2 eV, consistent with cadmium oxide nanoparticles.