9 December 2020 in Journal of Lightwave Technology
Co-packaging of optics and electronics for data center switches has been proposed to reduce system-level power consumption by minimizing power-hungry electrical interconnects. Co-packaging optical components near high-temperature electronics, however, can diminish their performance and reliability. Moreover, limitations of the switch environment, such as restricted footprint, power, and number of fiber attachments can limit practical co-packaging implementations. Here, we study four architectures for co-packaged optical interfaces using either single- or multi-wavelength light sources that can be either external to or integrated with the optical interfaces. We model the temperature- and current-dependent performance and reliability of the sources and calculate the link budget for switch bandwidths up to 102.4 Tb/s. We compare architectures based on coherent and direct detection and find that all coherent detection architectures support 102.4 Tb/s switching with over 13 dB link budget, while most direct detection architectures scale to 51.2 Tb/s or 102.4 Tb/s switching with link budgets less than 5 dB. In addition, we demonstrate that external-source architectures require wavelength-division multiplexing at lower switch bandwidths and consequently have link budgets 1-5 dB lower than integrated source architectures. Further, we demonstrate that higher-power lasers can scale external architectures to 102.4 Tb/s switching with over 4 dB link budgets. Finally, for 51.2 Tb/s switching, we show that a reduction in integrated source temperature improves link budgets by 2-4 dB and direct detection external-source architectures can achieve greater than 5 dB link budget with fewer than 300 fiber attachments.
14 February 2023 in Journal of Lightwave Technology
With millions of optical links deployed in a typical Data Center (DC) network, telemetry is becoming increasingly important, especially as the number of links and transmission bandwidths rise over time. Multi-path interference (MPI) arising out of multiple optical reflections from fiber connectors, transmitters and receivers is one optical impairment that has been known to cause performance degradation of links in the DC. Through monitoring the statistics of each pulse amplitude modulation (PAM) level at the receiver, we propose and experimentally demonstrate a digital signal processing (DSP) based method to detect the presence of a high level of MPI in intensity modulation direct detection (IMDD) networks. Having this information at hand, the fiber path can be cleaned before an optical link is degraded or fails, which can prevent misdiagnosis and can save time and effort spent on triaging after failure.