Timothy P. Wilson

Timothy P. Wilson

Auto-generated profile, based on publicly available information

Timothy P. Wilson

U.S. Geological Survey, Lawrenceville, New Jersey 08648, U.S.A.

Research Focus & Metrics

Academic Career Length

21Years (2006-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
1 January 2024
Verified
Report
Open access
PDF file
TWTimothy P. Wilson
Timothy P. Wilson
CMCherie V. Miller
Cherie V. Miller
ELEvan A. Lechner
Evan A. Lechner
The importance of fluvial systems in the transport of sediment, dissolved and suspended contaminants, nutrients, and bacteria through the environment is well established. The U.S. Environmental Protection Agency (EPA) identifies sediment as the single most widespread water contaminant affecting the beneficial uses of the Nation’s rivers and streams. The evaluation of water-quality as it relates to agriculture, urbanization, highway and residential construction, mining, industrial and human wastes, and other activities requires an extensive data and sample-collection effort. This is especially the case when studying urbanized river basins, where during hydrologic events, concentration of suspended sediment and contaminants can vary rapidly and over large ranges. Where synoptic studies of watersheds are called for, sampling may be needed at many sites throughout the basin; a complicated and difficult task in some settings. Automatic pumping samplers (autosamplers) are one method for conducting intensive time-varying sampling throughout watersheds.This report presents guidelines for the use of autosamplers for collecting surface-water samples by the U.S. Geological Survey. An autosampler is an automatic, pump-based sampler that collects a prescribed volume of water from streams, lakes, reservoirs, storm drains, or other bodies of water after receiving a command from an internal or external control unit. It deposits this sample into a specified container for later analysis of physical, chemical, or biological constituents. This report provides a general background on types of autosamplers and how they work; guidance for designing, selecting, installing, servicing, and calibrating autosamplers; guidance on standardized operating procedures, and guidance on quality-assurance and quality-control efforts when using an autosampler.

1 October 2017 in Journal of Coastal Research
Verified
Journal Article
Closed access
TWTimothy Wilson
Timothy Wilson
VDVincent DePaul
Vincent DePaul
Wilson, T. and DePaul, V., 2017. In situ benthic nutrient flux and sediment oxygen demand in Barnegat Bay, New Jersey. In: Buchanan, G.A.; Belton, T.J., and Paudel, B. (eds.), A Comprehensive Assessment of Barnegat Bay-Little Egg Harbor, New Jersey. The U.S. Geological Survey, in cooperation with the New Jersey Department of Environmental Protection, measured sediment oxygen demand (SOD) and benthic nutrient fluxes throughout Barnegat Bay, New Jersey. SOD was determined in situ using chambers equipped with optical dissolved oxygen sensors. The benthic nutrient fluxes of ammonia (NH3), nitrite + nitrate ( plus ions; here, referred to as NO32), soluble reactive phosphorous (SRP), and dissolved silica (SiO2) were measured with in situ equilibrium dialysis samplers. Measurements were made at nine stations around the periphery and at three mid-Bay locations from August 2012 to October 2013. The SOD ranged from −1.5 to −8.4 g of oxygen (O2) m−2 d−1. The SOD rates varied as a function of water temperatu...

1 January 2007
Verified
Report
Closed access
TWTimothy P. Wilson
Timothy P. Wilson
JBJennifer L. Bonin
Jennifer L. Bonin
Flood of April 2-4, 2005, Delaware River Main Stem from Port Jervis, New York, to Cinnaminson, New Jersey

1 January 2020
Verified
Report
Closed access
PDF file
TWTimothy P. Wilson
Timothy P. Wilson
First posted February 28, 2020 Director, MD-DE-DC Water Science Center U.S. Geological Survey 5522 Research Park Drive Baltimore, MD 21228 A study was conducted by the U.S. Geological Survey (USGS) in cooperation with the Washington, D.C., Department of Energy & Environment to estimate the loads of suspended-sediment-bound chemical compounds in five gaged tributaries and four ungaged tributaries of the Anacostia River (known locally as “Lower Anacostia River”) in Washington, D.C. Tributaries whose discharge is measured by the USGS are the Northeast and Northwest Branches of the Anacostia River, referred to in this report as “Northeast Branch” (NEB) and “Northwest Branch” (NWB), respectively; Watts Branch (WB); and Hickey Run (HR). A USGS streamflow-gaging station was established in 2016 on Beaverdam Creek (known locally as “Lower Beaverdam Creek” [LBDC]) to support this study. The ungaged streams studied include Nash Run; Pope Branch; an unnamed stream at Fort DuPont, referred to in this report as “Fort DuPont Creek”; and an unnamed stream at Fort Stanton, referred to in this report as “Fort Stanton Creek.” The gaged streams were sampled during four to five storms and two low-flow events during January, March, May, and July 2017. The ungaged streams were sampled during one storm and one low-flow event during July 2017. Storm sampling involved collecting large-volume (60- to 70-liter) composite samples, then removing sediment by filtration in the laboratory. Low-flow samples were obtained by filtering streamwater directly in the field. Continuously recording data sondes were deployed throughout the study to measure turbidity and other water-quality characteristics. During sampling, multiple discrete samples of streamwater were collected to determine suspended-sediment concentration (SSC) and particulate organic carbon (POC) concentration. Shortly after each storm, bed sediment was collected for chemical analysis. Sediment samples were analyzed for 209 polychlorinated biphenyl (PCB) congeners; 35 polyaromatic hydrocarbon (PAH) compounds, including 20 nonalkylated and 15 alkylated species; and 20 organochlorine pesticide (OP) compounds. Sediment from one storm was analyzed for 23 metals. Relations were developed among turbidity, discharge, and measured SSC by using multiple linear regression of log-transformed data. These relations were used to estimate SSC from continuous records of discharge and turbidity and were subsequently used to estimate sediment loads for the 2017 calendar year. USGS continuous records of turbidity in NEB, NWB, Watts Branch, and Hickey Run were available for 2013–17, which allowed sediment loads to be calculated for these years. Sediment loads for the ungaged streams were estimated by using loads measured in Watts Branch adjusted on the basis of stream-basin areas. Sediment loads for 2017 total 3.10×107 kilograms (kg), with 1.02×107 kg (33 percent of total) from the NEB, 1.55×107 kg (50 percent) from the NWB, 4.45×106 kg (14 percent) from LBDC, 5.62×105 kg (2 percent) from Watts Branch, and 2.82×105 kg (1 percent) from Hickey Run. Sediment yields were highest from NWB and LBDC (3.13×105 kilograms per year per square mile [kg/yr/mi2] and 3.01 kg/yr/mi2, respectively). As a result of gaps in turbidity and discharge data, the load for LBDC reported here was calculated from measurements representing only 88 percent of the year (2017), and thus underestimates the actual load. All other gaged tributaries had datasets covering 100 percent of the year and are considered to fully represent actual loads. Estimated sediment loads for the ungaged streams during 2017 total 3.5×105 kg, with 1.2×105 kg from Nash Run, 6.2×104 kg from Pope Branch, 1.1×105 kg from Fort DuPont Creek, and 5.6×104 kg from Fort Stanton Creek. Concentrations of PCBs, PAHs, and chlorinated pesticides in streamwater are presented for stormflow and low-flow conditions. Average concentrations (in stormflow and low-flow samples) of total PCBs (sum of all congeners, including coelutions) are 5.9 micrograms per kilogram (µg/kg) for NEB, 6.6 µg/kg for NWB, 130 µg/kg for LBDC, 34 µg/kg for Watts Branch, and 69 µg/kg for Hickey Run. Average concentrations of total PAHs (tPAH) (total of nonalkylated and alkylated species) are 2,000 µg/kg for NEB, 3,300 µg/kg for NWB, 2,200 µg/kg for LBDC, 2,400 µg/kg for Watts Branch, and 18,000 µg/kg for Hickey Run. tPAH concentrations among the ungaged streams were highest in Nash Run (5,500 µg/kg); concentrations in the other ungaged streams were less than (<) 700 µg/kg. The general magnitude of tPCB and tPAH concentrations in streamwater samples was low-flow samples greater than (>) stormflow samples greater than or equal to (≥) bed-sediment samples. PCB congener profiles in the three types of samples were nearly identical in each stream and were similar in all streams except for LBDC, where the dominant PCBs shifted to the lighter di- through tetra- homologs. LBDC showed higher tPCB concentrations and a distinct congener profile from the other streams. The similarity in congener makeup supported that averaging PCB concentrations in stormflow and low-flow samples was appropriate for calculating chemical loads. Loads of tPCB, tPAH (total of alkylated and nonalkylated forms), and pesticides were estimated for each stream by multiplying average contaminant concentrations by the respective sediment loads. Total PCB loads for 2017 were estimated to be 820 grams (g) with 8 percent (60 g) from NEB, 12 percent (95 g) from NWB, 75 percent (590 g) from LBDC, 3 percent (25 g) from Watts Branch, and 2.5 percent (19 g)...


1 January 2006
Verified
Report
Closed access
JBJennifer L. Bonin
Jennifer L. Bonin
TWTimothy P. Wilson
Timothy P. Wilson
Organic Compounds, Trace Elements, Suspended Sediment, and Field Characteristics at the Heads-of-Tide of the Raritan, Passaic, Hackensack, Rahway, and Elizabeth Rivers, New Jersey, 2000-03