Xiongjun He

Xiongjun He

Auto-generated profile, based on publicly available information

Xiongjun He

School of Transportation and Logistics Engineering, Wuhan University of Technology, Wuhan 430063, China

Research Focus & Metrics

Academic Career Length

16Years (2011-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
21 November 2022 in Advances in Materials Science and Engineering
Verified
Journal Article
Open access
PDF file
Chao WuChao Wu
Chao Wu
XHXiongjun He
Xiongjun He
XZXia Zhao
Xia Zhao
LHLi He
Li He
YSYuan Song
Yuan Song
XZXiuyan Zhang
Xiuyan Zhang
Owing to its enhanced strength, ductility, and resistance to harsh environments, increasing research attention has been paid to alkali-resistant glass fiber reinforced concrete (ARGFRC). This paper presents experimental studies concerning the effects of fiber content on the mechanical properties and microstructural characteristics of ARGFRC. The amount of glass fiber was considered at levels of 0.0, 0.3, 0.5, 0.8, 1.0, 1.3, and 1.5 of the concrete volume. The compression, flexural, impact resistance, scanning electron microscopy, and energy dispersive spectroscopy tests were conducted. The flexural load-deflection curve, flexural strength, flexural toughness index, flexural fracture energy, postcracking stiffness, postpeak stiffness, and impact resistance energy absorption were obtained. Then the changing law affected by fiber content on these mechanical properties was further analyzed, and the corresponding equation was fitted. When fiber content was 1.5, the flexural toughness index I5, I10, and I20 values were 4.0, 5.9, and 8.9, respectively, and increased by 3.07.9 times. Glass fiber incorporation could increase the ductility and delay the brittle failure when the fiber content reached 0.8. The largest postcracking stiffness was calculated at 36.174kN/mm with a fiber content of 0.8. The higher the fiber content, the larger the postpeak stiffness of the tested beams. Impact resistance test results demonstrated that the optimum fiber content was 1.3. As the fiber content increased, the effect of the concrete grout on the fiber packaging decreased, according to the scanning electron microscopy analysis. The energy dispersive spectroscopy observation proved that adding a certain fiber content did not affect the concrete hydration reaction.

1 December 2016 in Journal of Composites for Construction
Verified
Journal Article
Closed access
WYWenrui Yang
Wenrui Yang
XHXiong-Jun He
Xiong-Jun He
LDLi Dai
Li Dai
XZXia Zhao
Xia Zhao
FSFeng Shen
Feng Shen
An experimental and analytical investigation of the fracture performance of glass fiber-reinforced polymer (GFRP) bars embedded in concrete beams with cracks is presented. Beams with cracks were conditioned with sustained flexural loads in outdoor, 60°C-alkaline solution, and tap water environments for up to 9 months, after which they were subjected to eccentric three-point flexure tests to evaluate fracture performance and microscopic tests to analyze the changes in microscopic structures through scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FTIR), and differential scanning calorimetry (DSC). The results showed that the cracks aggravated the influence of the environments on GFRP-RC beams but did not change the mechanisms of mechanical degradation of the GFRP bars. Based on the research conclusions, the same durability tests and eccentric three-point flexure tests were conducted to determine the permissible crack values and treatment recommendations for GFRP-RC beams...

16 April 2024 in Materials and Structures
Verified
Journal Article
Open access
PDF file
BWBingyan Wei
Bingyan Wei
XHXiongjun He
Xiongjun He
Wu WeiweiWu Weiwei
Wu Weiwei
Chao WuChao Wu
Chao Wu
JHJia He
Jia He
To study the flexural behavior of glass fiber (GFRP) bars and steel bars hybrid reinforced polypropylene fiber concrete (Hybrid-PFRC) beams, one GFRP-PFRC beam, one Steel-PFRC beam, and five Hybrid-PFRC beams were designed and fabricated. The effects of the different area ratio ( $${{A_{f} } \mathord{\left/ {\vphantom {{A_{f} } {A_{s} }}} \right. \kern-0pt} {A_{s} }}$$ A f / A s ) of GFRP to steel bars and polypropylene fiber (PP) volume fraction on the flexural behavior of Hybrid-PFRC beams were investigated through experiments. The research results indicated that the Hybrid-PFRC beams’ load–deflection curves exhibited trilinear characteristics with specimen cracking and steel bars yielding as turning points. As $${{A_{f} } \mathord{\left/ {\vphantom {{A_{f} } {A_{s} }}} \right. \kern-0pt} {A_{s} }}$$ A f / A s increased, the flexural bearing capacity of Hybrid-PFRC beams increased, the deflection decreased, the crack spacing and width decreased, and the ductility decreased. The addition of PP did not significantly improve the flexural bearing capacity and cracking moment of Hybrid-PFRC beams, but it greatly enhanced the ductility of the beam. Moreover, PP had good advantages in controlling crack propagation in the beam. The article also used the theoretical model to predict and analyze the flexural behavior of Hybrid-PFRC beams. When predicting the maximum crack width of Hybrid-PFRC beams, when PP is not added to the beam, the bonding coefficient kb should be greater than 1.4; When PP is added to the beam, it is recommended that the bonding coefficient kb should not exceed 1.4.

11 September 2023 in Structures
Verified
Journal Article
Closed access
Chao WuChao Wu
Chao Wu
XHXiongjun He
Xiongjun He
LHLi He
Li He
XZXia Zhao
Xia Zhao
YWYin-Gang Wang
Yin-Gang Wang
XZXiuyan Zhang
Xiuyan Zhang

31 January 2024 in Structural Concrete
Verified
Journal Article
Open access
HWHuayi Wang
Huayi Wang
XHXiongjun He
Xiongjun He
MZMing Zhou
Ming Zhou
Chao WuChao Wu
Chao Wu
JHJia He
Jia He
In this study, we designed six polypropylene fiber-reinforced concrete (PP-FRC) beams and three reinforced concrete (RC) beams for experimental studies. Then, we analyzed the effects of incorporating PP fibers on the cracking performance of PP-FRC beams from the perspectives of load-displacement response, crack distribution, crack depth, crack width, crack spacing, and deformation coordination. The research results showed that the cracking load and number of cracks were positively correlated with the volume ratio of PP fibers, while the maximum crack width, average crack spacing, and average crack depth were negatively correlated with the volume ratio of PP fibers. Due to the bridging effect of fibers, the PP-FRC beam body and reinforcement could deform in a coordinated manner within a specific loading range after cracking, which increased the deformation coordination ability between the body and reinforcement. In this study, the cracking mechanism of PP-FRC beams was investigated. Firstly, the formula for calculating the cracking moment of PP-FRC beams was derived from the perspective of equivalent bending tensile strength. Then, based on the fiber bridging law and the bond strength between PP-FRC and reinforcement, theoretical formulas were proposed to predict the average crack spacing and maximum crack width of PP-FRC beams. Finally, through comparison, it was found that the proposed formulas could be used for characteristic crack prediction.

31 August 2025 in Theoretical and Applied Fracture Mechanics
Verified
Journal Article
Closed access
BWBingyan Wei
Bingyan Wei
XHXiongjun He
Xiongjun He
ZTZhiyi Tang
Zhiyi Tang
HWHuayi Wang
Huayi Wang
MZMing Zhou
Ming Zhou